CVE-2026-20053

mediumpriority · track · 0EPSS 0.004 · 38 %ileDEEUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.44% (38th) EPSS

CVSS 5.8 · medium

Is it mine?

702 products

Check your exposure

Who says so?

4 sources

cnnvd · enisa_euvd · cert_bund · cisco_csaf

EPSS · scored 2026-10-27

Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash. This vulnerability is due to improper range checking when decompressing VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause an overflow of heap data, which could cause a DoS condition.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixed17.12.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.3acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4bcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5bcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5dcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.13.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.14.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.2acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.2ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.3acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.4ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.16.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.17.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.9.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.9.5ecisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.0.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.10.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.12.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.13.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.14.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.15.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.16.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.17.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.18.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.19.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.20.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.21.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.22.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.23.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.24.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.25.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.27.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.28.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.29.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.30.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.31.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.32.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.36.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.38.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.39.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.40.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.41.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.42.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.43.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.45.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.47.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.48.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.50.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.51.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.52.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.53.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.55.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.56.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.57.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.58.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.59.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.6.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.60.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.61.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.62.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.63.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.64.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.65.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.66.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.67.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.69.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.7.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.70.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.71.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.72.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.73.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.74.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.75.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.76.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.77.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.78.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.8.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.81.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.82.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.83.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.84.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.9.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.7.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.8.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.0.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.0.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.0.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.1.7cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.2.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.3.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.3.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.3.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.4.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.4.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed4.4.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.0.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.0.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.1.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.1.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.1.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.2.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.3.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed5.3.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Workaround17.12.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.3acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4bcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5bcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5ccisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5dcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.6cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.13.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.14.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.2acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.2ccisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.3acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.4ccisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.16.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.17.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.1acisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.9.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.9.5ecisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.5cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.0.6cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.10.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.12.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.13.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.14.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.15.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.16.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.17.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.18.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.19.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.20.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.21.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.22.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.23.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.24.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.25.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.27.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.28.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.29.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.30.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.31.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.32.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.36.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.38.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.39.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.4.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.40.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.41.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.42.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.43.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.45.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.47.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.48.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.5.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.50.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.51.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.52.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.53.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.55.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.56.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.57.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.58.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.59.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.6.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.60.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.61.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.62.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.63.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.64.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.65.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.66.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.67.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.69.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.7.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.70.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.71.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.72.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.73.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.74.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.75.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.76.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.77.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.78.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.8.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.81.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.82.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.83.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.84.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.9.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.4.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.5.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.7.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.4.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.8.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.0.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.0.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.0.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.5cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.6cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.1.7cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.4cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.2.6cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.3.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.3.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.3.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.4.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.4.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.4.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround4.4.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.0.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.0.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.0.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.1.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.1.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.1.3cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.2.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.2.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.3.0cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.3.1cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround5.3.2cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

cvss

Technical severity, 0–10. One row per scoring source.

5.8

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lsecondary · ENISA EU

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lsecondary · psirt@cisco.com USexploitability 3.9 · impact 1.4

v3.15.3mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L/E:Usecondary · CVSS-BT (t0sche)

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lsecondary · Cisco PSIRT US

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Trackcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-122US

affected products (702)

Products and version ranges known to be affected.

Cisco ASA (Adaptive Security Appliance)all versionscert_bundDEcpe:/h:cisco:adaptive_security_appliance:-
Cisco IOS XE <17.12.7all versionscert_bundDE
Cisco IOS XE <17.15.5all versionscert_bundDE
Cisco IOS XE <17.18.3all versionscert_bundDE
Cisco IOS XE <26.1.1all versionscert_bundDE
Cisco Meraki MX <17.12.7all versionscert_bundDE
Cisco Meraki MX <17.15.5all versionscert_bundDE
Cisco Meraki MX <17.18.3all versionscert_bundDE
Cisco Meraki MX <26.1.1all versionscert_bundDE
Cisco Secure Firewall Threat Defenseall versionscert_bundDEcpe:/a:cisco:secure_firewall_threat_defense:-
Open Source Snort <3.9.7.0all versionscert_bundDE
Cisco IOS XE< 17.12.7cert_bundDE
Cisco IOS XE< 17.15.5cert_bundDE
Cisco IOS XE< 17.18.3cert_bundDE
Cisco IOS XE< 26.1.1cert_bundDE
Cisco Meraki MX< 17.12.7cert_bundDE
Cisco Meraki MX< 17.15.5cert_bundDE
Cisco Meraki MX< 17.18.3cert_bundDE
Cisco Meraki MX< 26.1.1cert_bundDE
Open Source Snort< 3.9.7.0cert_bundDE

showing 20 of 702

advisories (2)

Vendor and ecosystem advisories describing this.

WID-SEC-W-2026-0608Cisco ASA (Adaptive Security Appliance), Secure Firewall Threat Defense, Cisco IOS XE und Cisco Meraki MX: Mehrere Schwachstellen ermöglichen Denial of ServiceDeutsch2026-03-04csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen in Cisco ASA (Adaptive Security Appliance), Secure Firewall Threat Defense, Cisco IOS XE und Cisco Meraki MX ausnutzen, um einen Denial of Service Angriff durchzuführen.
cisco-sa-ftd-snort3-vbavuls-96UcVVedMultiple Cisco Products Snort 3 Visual Basic for Applications Denial of Service Vulnerabilities2026-03-04csaf · cisco_csafUS
Multiple Cisco products are affected by vulnerabilities in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to unexpectedly restart, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. Cisco has released software updates that address these vulnerabilities. There are workarounds that address these vulnerabilities. This advisory is part of the March 2026 release of the Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: March 2026 Semiannual Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75736"].

also known as (3)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd cert_bund cisco_csaf NVD CVE.org MITRE

published 2026-03-04modified 2026-08-20

references (4)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan