Multiple Cisco Products Snort 3 Visual Basic for Applications Denial of Service Vulnerabilities
Multiple Cisco products are affected by vulnerabilities in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to unexpectedly restart, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. Cisco has released software updates that address these vulnerabilities. There are workarounds that address these vulnerabilities. This advisory is part of the March 2026 release of the Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: March 2026 Semiannual Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75736"].
describes (4)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2026-20058US | — | — | ||
Multiple Cisco products are affected by vulnerabilities in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to cra… | ||||
| CVE-2026-20057US | — | — | ||
Multiple Cisco products are affected by a vulnerability in the Snort 3 Visual Basic for Applications (VBA) feature which could allow an unauthenticated, remote attacker to cause th… | ||||
| CVE-2026-20054US | — | — | ||
Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to cra… | ||||
| CVE-2026-20053US | — | — | ||
Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to cra… | ||||
references
External citations — patches, advisories, analysis.
- Security Vulnerability Policyexternal
- CSCwq23369external
- CSCwq23372external
- CSCwq23373external
- CSCwq23377external
- CSCwq97494external
- CSCwq97497external
- CSCwq97658,external
remediations (3562)
- Fixed16.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.12.8
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.10
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.7a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed16.6.9
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.10.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.11.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.4b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5d
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5d
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5d
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.5d
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.12.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.13.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.13.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.13.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.13.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.14.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.14.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.14.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.14.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.2c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.15.4c
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.16.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.16.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.16.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.16.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.17.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.17.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.17.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.17.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.18.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.2.1r
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.4a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.3.8
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.4.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.4.1b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.4.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.5.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.6.8a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.7.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.7.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.8.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.1a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.2a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.3a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.5a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.5e
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.5e
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.5f
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.7a
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.7b
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed17.9.8
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.0.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.10.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.10.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.10.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.10.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.12.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.12.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.12.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.12.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.13.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.13.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.13.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.13.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.14.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.14.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.14.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.15.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.15.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.15.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.15.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.16.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.16.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.16.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.16.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.17.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.17.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.17.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.17.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.18.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.18.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.18.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.19.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.19.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.19.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.19.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.20.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.20.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.20.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.20.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.21.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.21.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.21.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.21.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.22.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.22.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.22.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.22.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.23.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.23.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.23.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.23.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.24.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.24.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.24.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.24.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.25.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.25.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.25.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.25.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.27.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.27.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.27.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.27.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.28.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.28.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.28.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.28.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.29.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.29.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.29.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.29.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.30.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.30.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.30.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.30.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.31.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.31.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.31.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.31.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.32.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.32.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.32.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.32.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.36.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.36.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.36.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.36.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.38.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.38.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.38.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.38.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.39.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.39.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.39.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.39.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.40.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.40.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.40.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.40.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.41.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.41.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.41.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.41.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.42.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.42.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.42.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.42.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.43.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.43.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.43.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.43.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.45.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.45.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.45.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.45.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.47.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.47.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.47.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.47.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.48.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.48.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.48.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.48.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.50.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.50.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.50.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.50.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.51.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.51.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.51.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.51.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.52.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.52.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.52.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.52.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.53.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.53.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.53.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.53.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.55.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.55.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.55.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.55.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.56.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.56.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.56.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.56.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.57.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.57.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.57.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.58.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.58.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.58.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.58.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.59.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.59.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.59.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.59.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.6.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.60.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.60.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.60.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.60.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.61.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.61.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.61.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.61.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.62.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.62.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.62.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.62.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.63.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.63.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.63.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.63.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.64.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.64.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.64.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.64.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.65.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.65.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.65.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.65.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.66.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.66.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.66.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.66.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.67.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.67.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.67.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.67.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.69.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.69.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.69.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.69.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.70.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.70.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.70.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.70.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.71.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.71.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.71.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.71.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.72.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.72.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.72.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.72.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.73.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.73.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.73.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.73.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.74.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.74.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.74.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.74.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.75.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.75.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.75.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.75.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.76.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.76.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.76.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.76.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.77.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.77.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.77.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.77.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.78.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.78.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.78.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.78.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.8.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.8.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.8.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.8.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.81.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.81.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.81.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.81.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.82.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.82.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.82.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.82.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.83.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.83.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.83.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.83.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.84.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.84.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.84.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.84.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.9.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.9.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.9.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.1.9.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.17.0S
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.17.1S
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.3.7.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.6.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.7.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.8.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.8.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.8.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.8.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed3.9.5.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.0.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.1.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.2.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.3.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed4.4.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.0.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.1.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.2.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.0
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.1
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Fixed5.3.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedDenali-16.3.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedDenali-16.3.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedDenali-16.3.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedDenali-16.3.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedDenali-16.3.9
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedEverest-16.6.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedEverest-16.6.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedEverest-16.6.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.2
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.3
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.4
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.5
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.6
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.7
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedFuji-16.9.8
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Workaround16.12.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.12.8
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.10
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.7a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround16.6.9
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.10.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.11.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.4b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5d
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5d
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5d
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.5d
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.12.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.13.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.13.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.13.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.13.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.14.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.14.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.14.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.14.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.2c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.15.4c
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.16.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.16.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.16.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.16.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.17.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.17.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.17.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.17.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.18.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.2.1r
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.4a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.3.8
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.4.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.4.1b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.4.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.5.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.6.8a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.7.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.7.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.8.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.1a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.2a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.3a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.5a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.5e
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.5e
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.5f
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.7a
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.7b
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround17.9.8
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.0.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.10.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.10.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.10.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.10.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.12.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.12.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.12.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.12.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.13.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.13.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.13.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.13.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.14.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.14.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.14.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.15.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.15.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.15.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.15.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.16.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.16.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.16.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.16.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.17.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.17.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.17.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.17.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.18.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.18.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.18.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.19.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.19.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.19.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.19.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.20.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.20.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.20.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.20.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.21.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.21.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.21.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.21.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.22.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.22.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.22.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.22.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.23.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.23.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.23.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.23.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.24.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.24.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.24.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.24.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.25.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.25.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.25.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.25.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.27.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.27.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.27.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.27.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.28.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.28.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.28.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.28.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.29.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.29.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.29.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.29.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.30.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.30.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.30.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.30.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.31.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.31.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.31.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.31.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.32.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.32.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.32.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.32.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.36.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.36.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.36.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.36.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.38.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.38.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.38.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.38.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.39.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.39.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.39.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.39.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.40.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.40.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.40.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.40.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.41.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.41.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.41.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.41.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.42.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.42.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.42.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.42.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.43.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.43.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.43.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.43.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.45.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.45.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.45.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.45.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.47.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.47.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.47.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.47.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.48.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.48.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.48.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.48.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.50.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.50.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.50.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.50.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.51.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.51.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.51.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.51.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.52.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.52.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.52.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.52.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.53.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.53.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.53.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.53.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.55.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.55.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.55.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.55.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.56.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.56.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.56.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.56.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.57.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.57.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.57.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.58.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.58.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.58.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.58.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.59.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.59.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.59.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.59.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.6.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.6.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.6.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.6.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.60.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.60.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.60.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.60.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.61.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.61.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.61.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.61.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.62.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.62.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.62.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.62.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.63.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.63.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.63.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.63.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.64.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.64.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.64.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.64.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.65.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.65.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.65.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.65.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.66.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.66.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.66.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.66.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.67.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.67.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.67.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.67.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.69.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.69.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.69.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.69.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.70.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.70.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.70.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.70.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.71.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.71.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.71.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.71.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.72.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.72.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.72.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.72.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.73.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.73.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.73.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.73.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.74.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.74.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.74.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.74.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.75.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.75.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.75.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.75.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.76.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.76.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.76.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.76.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.77.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.77.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.77.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.77.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.78.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.78.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.78.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.78.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.8.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.8.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.8.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.8.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.81.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.81.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.81.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.81.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.82.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.82.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.82.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.82.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.83.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.83.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.83.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.83.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.84.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.84.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.84.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.84.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.9.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.9.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.9.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.1.9.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.17.0S
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.17.1S
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.7.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.6.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.7.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.8.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.8.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.8.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.8.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.9.5.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.0.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.1.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.2.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.3.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround4.4.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.0.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.1.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.2.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.0
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.1
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround5.3.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundDenali-16.3.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundDenali-16.3.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundDenali-16.3.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundDenali-16.3.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundDenali-16.3.9
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundEverest-16.6.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundEverest-16.6.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundEverest-16.6.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.2
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.3
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.4
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.5
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.6
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.7
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundFuji-16.9.8
There is a workaround that addresses these vulnerabilities. The vulnerabilities described in this advisory are due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by these vulnerabilities. For further details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Cisco Secure Firewall Management Center Snort 3 Configuration Guide, Version 7.2 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan