CVE-2024-20407

mediumpriority · track · 0EPSS 0.004 · 35 %ileDEEURUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.40% (35th) EPSS

CVSS 5.8 · medium

Is it mine?

841 products

Check your exposure

Who says so?

5 sources

cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-26

A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies on an affected system. Devices that are configured with Snort 2 are not affected by this vulnerability. This vulnerability is due to a logic error when handling embryonic (half-open) TCP connections. An attacker could exploit this vulnerability by sending a crafted traffic pattern through an affected device. A successful exploit could allow unintended traffic to enter the network protected by the affected device.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco ASA 5500-X Series Firewallscisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

cvss

Technical severity, 0–10. One row per scoring source.

5.8

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.15.8mediumAV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · FSTEC (BDU) RU

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · ENISA EU

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · psirt@cisco.com USexploitability 3.9 · impact 1.4

v3.15.3mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:N/E:Usecondary · CVSS-BT (t0sche)

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · Cisco PSIRT US

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: none · Automatable: yes · Technical Impact: partialcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-399USCWE-399US

affected products (841)

Products and version ranges known to be affected.

showing 20 of 841

advisories (2)

Vendor and ecosystem advisories describing this.

WID-SEC-W-2024-3269Mehrere Cisco Produkte / Snort: Mehrere SchwachstelleDeutsch2024-10-23csaf · cert_bundDE
Ein entfernter anonymer Angreifer kann mehrere Schwachstellen in Snort und Cisco Firepower ausnutzen, um Sicherheitsmaßnahmen zu umgehen und einen Denial-of-Service-Zustand zu erzeugen.
cisco-sa-snort-bypass-PTry37fXCisco Firepower Threat Defense Software TCP Snort 3 Detection Engine Bypass Vulnerability2024-10-23csaf · cisco_csafUS
A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies on an affected system. Devices that are configured with Snort 2 are not affected by this vulnerability. This vulnerability is due to a logic error when handling embryonic (half-open) TCP connections. An attacker could exploit this vulnerability by sending a crafted traffic pattern through an affected device. A successful exploit could allow unintended traffic to enter the network protected by the affected device. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].

also known as (4)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd fstec_bdu cert_bund cisco_csaf NVD CVE.org MITRE

published 2024-10-23modified 2026-08-11

references (3)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan