Cisco Firepower Threat Defense Software TCP Snort 3 Detection Engine Bypass Vulnerability
A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured policies on an affected system. Devices that are configured with Snort 2 are not affected by this vulnerability. This vulnerability is due to a logic error when handling embryonic (half-open) TCP connections. An attacker could exploit this vulnerability by sending a crafted traffic pattern through an affected device. A successful exploit could allow unintended traffic to enter the network protected by the affected device. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].
describes (1)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2024-20407US | — | — | ||
A vulnerability in the interaction between the TCP Intercept feature and the Snort 3 detection engine on Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticate… | ||||
references
External citations — patches, advisories, analysis.
- Security Vulnerability Policyexternal
- Cisco Firepower Threat Defense Software TCP Snort 3 Detection Engine Bypass Vulnerabilityself
- Cisco Security Vulnerability Policyexternal
- Security Impact Rating (SIR)external
- considering software upgradesexternal
- Cisco Software Checkerexternal
- Cisco Event Response: October 2024 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publicationexternal
- Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD)external
remediations (1138)
- FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco ASA 5500-X Series Firewalls
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.11 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.12 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.13 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.14 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.15 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.16 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.17 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.18 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.2.3.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.10 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.11 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.12 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.13 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.14 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.15 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.16 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.17 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.18 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.4.0.9 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 6.6.7.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco ASA 5500-X Series Firewalls
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.0.6.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.1.0.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Series
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtual
There is a workaround that addresses this vulnerability. To implement the workaround, turn off pkt-decode-optimization using the no asp inspect-dp pkt-decode-optimization FTD CLI command, as shown in the following example: FTD# no asp inspect-dp pkt-decode-optimization FTD# While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan