CVE-2011-4966

mediumpriority · track · 24EPSS 0.014 · 72 %ileEUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

1.38% (72nd) EPSS

CVSS 6 · medium

Is it mine?

123 products

Check your exposure

Who says so?

4 sources

cnnvd · enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-27

modules/rlm_unix/rlm_unix.c in FreeRADIUS before 2.2.0, when unix mode is enabled for user authentication, does not properly check the password expiration in /etc/shadow, which allows remote authenticated users to authenticate using an expired password.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixedfreeradius-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.src as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.src as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-debuginfo-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-krb5-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-ldap-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-mysql-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-perl-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-postgresql-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-python-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-unixODBC-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.i686 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius-utils-0:2.1.12-3.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 6)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258
https://access.redhat.com/errata/RHBA-2012:0881
Fixedfreeradius2-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.src as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-debuginfo-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-krb5-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-ldap-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-mysql-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-perl-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-postgresql-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-python-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-unixODBC-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134
Fixedfreeradius2-utils-0:2.1.12-5.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/knowledge/articles/11258 Users are also advised to check for RPM backup files ending in ".rpmnew" or ".rpmsave" under the /etc/raddb/ directory after the update because the FreeRADIUS server will attempt to load every file it finds in its configuration directory. The extra files will often cause the wrong configuration values to be applied resulting in either unpredictable behavior or the failure of the server to initialize and run.
https://access.redhat.com/errata/RHSA-2013:0134

cvss

Technical severity, 0–10. One row per scoring source.

6.0

010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · low–medium · 2.1–6

v2.06mediumAV:N/AC:M/Au:S/C:P/I:P/A:Pprimary · NVD / NIST USexploitability 6.8 · impact 6.4

v2.05.1mediumAV:N/AC:M/Au:S/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)

v2.02.1lowAV:N/AC:H/Au:S/C:N/I:P/A:Nsecondary · Red Hat Product Security US

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-255USprimary

affected products (123)

Products and version ranges known to be affected.

n/a n/a≤ n/aenisa_euvdEU
freeradius freeradiusall versionsnvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius≤ 2.2.0nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.1nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.2nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.3nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.4nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.5nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.6nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.7nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.7.1nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.8nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.8.1nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.9nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.9.0nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.9.1nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.9.2nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 0.9.3nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 1.0.0nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*
freeradius freeradius= 1.0.1nvdUScpe:2.3:a:freeradius:freeradius:*:*:*:*:*:*:*:*

showing 20 of 123

advisories (2)

Vendor and ecosystem advisories describing this.

RHBA-2012:0881Red Hat Bug Fix Advisory: freeradius bug fix and enhancement update2012-06-20csaf · redhat_csafUS
Updated freeradius packages that fix several bugs and add various enhancements are now available for Red Hat Enterprise Linux 6.
RHSA-2013:0134Red Hat Security Advisory: freeradius2 security and bug fix update2013-01-08csaf · redhat_csafUS
Updated freeradius2 packages that fix one security issue and multiple bugs are now available for Red Hat Enterprise Linux 5. The Red Hat Security Response Team has rated this update as having low security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.

also known as (3)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd nvd redhat_csaf NVD CVE.org MITRE

published 2013-03-12modified 2026-06-16

related (920)

Related entries.

ID	severity	EPSS	exploitable	published
CVE-2014-1812US	high9.0OT critical	65.1% (99th)	KEV	2014-05-14
The Group Policy implementation in Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, and Windows Server 2012 Gold and R2 does…
CVE-2010-0219US	high10.0	90.9% (100th)	Exploit	2010-10-18
Apache Axis2, as used in dswsbobje.war in SAP BusinessObjects Enterprise XI 3.2, CA ARCserve D2D r15, and other products, has a default password of axis2 for the admin account, whi…
CVE-2018-9995US	critical9.8	82.3% (100th)	Exploit	2018-04-10
TBK DVR4104 and DVR4216 devices, as well as Novo, CeNova, QSee, Pulnix, XVR 5 in 1, Securus, Night OWL, DVR Login, HVR Login, and MDVR Login, which run re-branded versions of the o…
CVE-2009-4189US	high10.0	78.5% (100th)	Exploit	2009-12-03
HP Operations Manager has a default password of OvW*busr1 for the ovwebusr account, which allows remote attackers to execute arbitrary code via a session that uses the manager role…
CVE-2013-4786US	high7.5	98.4% (100th)	Exploit	2013-07-08
The IPMI 2.0 specification supports RMCP+ Authenticated Key-Exchange Protocol (RAKP) authentication, which allows remote attackers to obtain password hashes and conduct offline pas…

+915 more

references (17)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan