CVE-2009-4565

highpriority · track · 31EPSS 0.024 · 84 %ileEURUUS

grimoire priorityP2 · Scheduled

Exploitable?

—

no known exploitation

Likely / severe?

2.40% (84th) EPSS

CVSS 7.5 · high

Is it mine?

178 products

Check your exposure

Who says so?

4 sources

enisa_euvd · fstec_bdu · nvd · redhat_csaf

EPSS · scored 2026-10-27

sendmail before 8.14.4 does not properly handle a '\0' character in a Common Name (CN) field of an X.509 certificate, which (1) allows man-in-the-middle attackers to spoof arbitrary SSL-based SMTP servers via a crafted server certificate issued by a legitimate Certification Authority, and (2) allows remote attackers to bypass intended access restrictions via a crafted client certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixedsendmail-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.src as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-cf-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.s390 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-debuginfo-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.s390 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-devel-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop Workstation (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-doc-0:8.13.8-8.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2010:0237
Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262

cvss

Technical severity, 0–10. One row per scoring source.

7.5

010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–high · 4–7.5

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USexploitability 10 · impact 6.4

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Psecondary · FSTEC (BDU) RU

v2.06.4mediumAV:N/AC:L/Au:N/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)

v2.04mediumAV:N/AC:H/Au:N/C:P/I:P/A:Nsecondary · Red Hat Product Security US

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-310USprimaryCWE-310US

affected products (178)

Products and version ranges known to be affected.

n/a n/a≤ n/aenisa_euvdEU
Сообщество свободного программного обеспечения Debian GNU/Linux≤ 4fstec_bduRU
sendmail sendmail≤ 8.14.3nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 2.6nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 2.6.1nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 3.0nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 3.0.1nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 4.1nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 4.55nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 5nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 5.59nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 5.61nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 5.65nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.10nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.10.0nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.10.1nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.10.2nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.11.0nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.11.1nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*
sendmail sendmail= 8.11.2nvdUScpe:2.3:a:sendmail:sendmail:*:*:*:*:*:*:*:*

showing 20 of 178

advisories (2)

Vendor and ecosystem advisories describing this.

RHSA-2010:0237Red Hat Security Advisory: sendmail security and bug fix update2010-03-29csaf · redhat_csafUS
Updated sendmail packages that fix two security issues and several bugs are now available for Red Hat Enterprise Linux 5. The Red Hat Security Response Team has rated this update as having low security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
RHSA-2011:0262Red Hat Security Advisory: sendmail security and bug fix update2011-02-16csaf · redhat_csafUS
Updated sendmail packages that fix one security issue and three bugs are now available for Red Hat Enterprise Linux 4. The Red Hat Security Response Team has rated this update as having low security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.

also known as (5)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

enisa_euvd fstec_bdu nvd redhat_csaf NVD CVE.org MITRE

published 2010-01-04modified 2026-06-16

related (2,920)

Related entries.

ID	severity	EPSS	exploitable	published
CVE-2020-1464US	low2.1OT critical	38.9% (99th)	KEV	2020-08-17
A spoofing vulnerability exists when Windows incorrectly validates file signatures. An attacker who successfully exploited this vulnerability could bypass security features and loa…
CVE-2013-7331US	medium4.3OT critical	50.2% (99th)	KEV	2014-02-26
The Microsoft.XMLDOM ActiveX control in Microsoft Windows 8.1 and earlier allows remote attackers to determine the existence of local pathnames, UNC share pathnames, intranet hostn…
CVE-2013-3900US	high7.6OT critical	44.6% (99th)	KEV	2013-12-11
Why is Microsoft republishing a CVE from 2013? We are republishing CVE-2013-3900 in the Security Update Guide to update the Security Updates table and to inform customers that the…
CVE-2014-8684US	critical9.8	71.7% (99th)	Exploit	2017-09-19
CodeIgniter before 3.0 and Kohana 3.2.3 and earlier and 3.3.x through 3.3.2 make it easier for remote attackers to spoof session cookies and consequently conduct PHP object injecti…
CVE-2016-2107US	medium5.9	89.1% (100th)	Exploit	2016-05-05
The AES-NI implementation in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h does not consider memory allocation during a certain padding check, which allows remote attackers to obta…

+2915 more

references (40)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan