Red Hat Security Advisory: sendmail security and bug fix update
Updated sendmail packages that fix one security issue and three bugs are now available for Red Hat Enterprise Linux 4. The Red Hat Security Response Team has rated this update as having low security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.
describes (1)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2009-4565US | high7.5 | — | ||
sendmail before 8.14.4 does not properly handle a '\0' character in a Common Name (CN) field of an X.509 certificate, which (1) allows man-in-the-middle attackers to spoof arbitrar… | ||||
references
External citations — patches, advisories, analysis.
- https://access.redhat.com/errata/RHSA-2011:0262self
- https://access.redhat.com/security/updates/classification/#lowexternal
- 434645external
- 485380external
- 552622external
- Canonical URLself
remediations (74)
- Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.src as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-cf-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-debuginfo-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-devel-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.i386 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.ia64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.ppc as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.s390 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.s390x as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux AS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux ES version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262 - Fixedsendmail-doc-0:8.13.1-6.el4.x86_64 as a component of Red Hat Enterprise Linux WS version 4
As part of the fix for BZ#434645, a script called purge-mqueue is shipped with this update. It is located in the /usr/share/sendmail/ directory. The primary purpose of this script is a one-time clean up of the mqueue from stalled files that were created before the installation of this update. By default, the script removes all files from /var/spool/mqueue/ that have an atime older than one month. It requires the tmpwatch package to be installed. If you have stalled files in your mqueue you can run this script or clean them manually. It is also possible to use this script as a cron job (for example, by copying it to /etc/cron.daily/), but it should not be needed in most cases, because this update should prevent the creation of new stalled files. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259
https://access.redhat.com/errata/RHSA-2011:0262
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan