CVE-2003-0461

lowpriority · track · 8EPSS 0.004 · 35 %ileEUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.41% (35th) EPSS

CVSS 2.1 · low

Is it mine?

148 products

Check your exposure

Who says so?

3 sources

enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-27

/proc/tty/driver/serial in Linux 2.4.x reveals the exact number of characters used in serial links, which could allow local users to obtain potentially sensitive information such as the length of passwords.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

FixedRed Hat Enterprise Linux AS (Advanced Server) version 2.1 redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied, especially the additional packages from RHSA-2002:205 and RHSA-2002:206 respectively. The procedure for upgrading the kernel manually is documented at: http://www.redhat.com/support/docs/howto/kernel-upgrade/ Please read the directions for your architecture carefully before proceeding with the kernel upgrade. Please note that this update is also available via Red Hat Network. Many people find this to be an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly on default configurations of up2date.
https://access.redhat.com/errata/RHSA-2002:263
FixedRed Hat Linux 7.1redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
FixedRed Hat Linux 7.2redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
FixedRed Hat Linux 7.3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
FixedRed Hat Linux 8.0redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
FixedRed Hat Linux 9redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
Fixedkernel-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ppc64iseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.ppc64pseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.src as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.src as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.src as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.src as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-BOOT-0:2.4.21-15.EL.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-BOOT-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-BOOT-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-BOOT-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia32e as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ppc64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ppc64iseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.ppc64pseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-debuginfo-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.ppc64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-doc-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-hugemem-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-smp-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.ppc64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-source-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia32e as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ppc64iseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.ppc64pseries as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188
Fixedkernel-unsupported-0:2.4.21-15.EL.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:188

cvss

Technical severity, 0–10. One row per scoring source.

2.1

010

base score 0–10 · higher = more severe · hover a vector to decode

v2.02.1lowAV:L/AC:L/Au:N/C:P/I:N/A:Nprimary · NVD / NIST USexploitability 3.9 · impact 2.9

v2.01.8lowAV:L/AC:L/Au:N/C:P/I:N/A:N/E:Usecondary · CVSS-BT (t0sche)

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-200USLLM-inferred

affected products (148)

Products and version ranges known to be affected.

n/a n/a≤ n/aenisa_euvdEU
redhat linux= 7.1nvdUScpe:2.3:o:redhat:linux:*:*:*:*:*:*:*:*
redhat linux= 7.2nvdUScpe:2.3:o:redhat:linux:*:*:*:*:*:*:*:*
redhat linux= 7.3nvdUScpe:2.3:o:redhat:linux:*:*:*:*:*:*:*:*
redhat linux= 8.0nvdUScpe:2.3:o:redhat:linux:*:*:*:*:*:*:*:*
redhat linux= 9.0nvdUScpe:2.3:o:redhat:linux:*:*:*:*:*:*:*:*
kernel-0:2.4.21-15.EL.athlon as a component of Red Hat Desktop version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux AS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux ES version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.athlon as a component of Red Hat Enterprise Linux WS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.i686 as a component of Red Hat Desktop version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux AS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux ES version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.i686 as a component of Red Hat Enterprise Linux WS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Desktop version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux AS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux ES version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia32e as a component of Red Hat Enterprise Linux WS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux AS version 3all versionsfixedredhat_csafUS
kernel-0:2.4.21-15.EL.ia64 as a component of Red Hat Enterprise Linux ES version 3all versionsfixedredhat_csafUS

showing 20 of 148

advisories (3)

Vendor and ecosystem advisories describing this.

RHSA-2002:263Red Hat Security Advisory: kernel security update2002-11-22csaf · redhat_csafUS
The kernel in Red Hat Linux Advanced Server 2.1 is vulnerable to a local denial of service attack. Updated packages are available which address this vulnerability. [Updated 28 August 2003] Added CAN-2003-0461 to the list of security issues that were fixed by this advisory (there are no changes to the packages themselves).
RHSA-2003:238Red Hat Security Advisory: : : : Updated 2.4 kernel fixes vulnerabilities2003-07-21csaf · redhat_csafUS
Updated kernel packages are now available fixing several security vulnerabilities. [Updated 28 August 2003] Added CAN-2003-0699 and CAN-2003-0700 to the list of security issues that are fixed by this advisory (there are no changes to the packages themselves).
RHSA-2004:188Red Hat Security Advisory: Updated kernel packages available for Red Hat Enterprise Linux 3 Update 22004-05-12csaf · redhat_csafUS
Updated kernel packages are now available as part of ongoing support and maintenance of Red Hat Enterprise Linux version 3. This is the second regular update.

also known as (2)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

enisa_euvd nvd redhat_csaf NVD CVE.org MITRE

published 2003-08-27modified 2026-06-16

references (16)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan