Red Hat Security Advisory: : : : Updated 2.4 kernel fixes vulnerabilities
Updated kernel packages are now available fixing several security vulnerabilities. [Updated 28 August 2003] Added CAN-2003-0699 and CAN-2003-0700 to the list of security issues that are fixed by this advisory (there are no changes to the packages themselves).
describes (10)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2003-0700US | high7.5 | — | ||
The C-Media PCI sound driver in Linux before 2.4.22 does not use the get_user function to access userspace in certain conditions, which crosses security boundaries and may facilita… | ||||
| CVE-2003-0461US | low2.1 | — | ||
/proc/tty/driver/serial in Linux 2.4.x reveals the exact number of characters used in serial links, which could allow local users to obtain potentially sensitive information such a… | ||||
| CVE-2003-0462US | low1.2 | Exploit | ||
A race condition in the way env_start and env_end pointers are initialized in the execve system call and used in fs/proc/base.c on Linux 2.4 allows local users to cause a denial of… | ||||
| CVE-2003-0464US | medium4.6 | — | ||
The RPC code in Linux kernel 2.4 sets the reuse flag when sockets are created, which could allow local users to bind to UDP ports that are used by privileged services such as nfsd. | ||||
| CVE-2003-0550US | medium5.0 | — | ||
The STP protocol, as enabled in Linux 2.4.x, does not provide sufficient security by design, which allows attackers to modify the bridge topology. | ||||
| CVE-2003-0551US | medium5.0 | — | ||
The STP protocol implementation in Linux 2.4.x does not properly verify certain lengths, which could allow attackers to cause a denial of service. | ||||
| CVE-2003-0552US | medium5.0 | — | ||
Linux 2.4.x allows remote attackers to spoof the bridge Forwarding table via forged packets whose source addresses are the same as the target. | ||||
| CVE-2003-0699US | high7.5 | — | ||
The C-Media PCI sound driver in Linux before 2.4.21 does not use the get_user function to access userspace, which crosses security boundaries and may facilitate the exploitation of… | ||||
| CVE-2003-0476US | low2.1 | — | ||
The execve system call in Linux 2.4.x records the file descriptor of the executable process in the file table of the calling process, which allows local users to gain read access t… | ||||
| CVE-2003-0501US | low2.1 | Exploit | ||
The /proc filesystem in Linux allows local users to obtain sensitive information by opening various entries in /proc/self before executing a setuid program, which causes the progra… | ||||
references
External citations — patches, advisories, analysis.
remediations (50)
- FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.1
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.2
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 7.3
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 8.0
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238 - FixedRed Hat Linux 9
Before applying this update, make sure all previously released errata relevant to your system have been applied. To use Red Hat Network to upgrade the kernel, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. Note that you need to select the kernel explicitly if you are using the default configuration of up2date. To install kernel packages manually, use "rpm -ivh <package>" and modify system settings to boot the kernel you have installed. To do this, edit /boot/grub/grub.conf and change the default entry to "default=0" (or, if you have chosen to use LILO as your boot loader, edit /etc/lilo.conf and run lilo) Do not use "rpm -Uvh" as that will remove your running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2003:238
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan