CVE-2023-6932

ABB became aware of vulnerabilities in IPGW product versions listed as affected in the advisory. An attacker who successfully exploits these vulnerabilities could potentially gain unauthorized access and potentially compromise the system's - and log-file - confidentiality, integrity and availability. ABB requires that the IP-address of an IPGW should not be accessible from the Internet or any other network considered insecure. The communication between IPGW and the associated Internet Service shall be outbound-initiated, bi-directional. Any unsolicited inbound connection shall be discarded. A common way to ensure this best practice is to operate IPGW behind a firewall. Researchers have reported 2518 CVEs to ABB which were identified using an automated scanning tool in a local network. ABB has analyzed these CVEs carefully and came to the following result: 2074 - CVE's not impacting IPGW because it belongs to SW components inside the IPGW-Firmware-Image, that are not supported by the IPGW as a product, e.g. IPGW does not support: Display, USB-port, Keyboard, etc. 7 - High Severity CVEs that belong to SW components integrated in IPGW-firmware-image. These CVE’s are considered to have a high severity because there are proof of concept (PoC) descriptions available. For cases that are not fixed, ABB was not able to find an appropriate solution. 34 - Medium CVEs that belong to SW components integrated in IPGW-firmware-image. ABB defines a medium severity for CVE’s where there is no PoC available describing how to exploit such CVE and where the CVE belongs to a SW-Component as part of the IPGW-firmware-image, that is frequently used. For cases that are not fixed, ABB was not able to find an appropriate solution. 403 - Low severity CVEs that belong to SW components integrated in IPGW-firmware-image. ABB defines a low severity for CVE’s where there is no PoC available describing how to exploit such CVE and where criticality is seen low. ABB will monitor these CVE’s internally

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 TM MFP V1.1 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V1.1 only; for version V1.1.1 refer to SSA-784472.

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).

SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. SIMATIC S7-1500 TM MFP V1.0 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. This advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (https://cert-portal.siemens.com/productcert/html/ssa-265688.html).

Ein lokaler Angreifer kann mehrere Schwachstellen in Linux Kernel ausnutzen, um einen Denial of Service zu verursachen, Code auszuführen oder um seine Privilegien zu erhöhen.

Ein Angreifer kann mehrere Schwachstellen in IBM QRadar SIEM ausnutzen, um beliebigen Code auszuführen, Sicherheitsmaßnahmen zu umgehen, einen Denial-of-Service-Zustand herbeizuführen, vertrauliche Informationen offenzulegen, Dateien zu manipulieren, seine Privilegien zu erweitern, einen Cross-Site-Scripting (XSS)-Angriff durchzuführen oder einen nicht spezifizierten Angriff auszuführen.

Ein Angreifer kann mehrere Schwachstellen in Red Hat OpenShift ausnutzen, um Dateien zu manipulieren, einen Denial-of-Service-Zustand zu verursachen, beliebigen Code auszuführen, vertrauliche Informationen offenzulegen, seine Privilegien zu erweitern oder um weitere nicht spezifizierte Angriffe auszuführen.

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. This advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 ( https://cert-portal.siemens.com/productcert/html/ssa-265688.html).

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.