CVE-2022-50880

highPriorität · verfolgen · 0EPSS 0.003 · 25. PerzentilDEEU
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
0.32% (25th) EPSS
CVSS 8.8 · high
Is it mine?
36 products
Prüfe deine Angriffsfläche
Who says so?
4 sources
cnnvd · enisa_euvd · cert_bund · suse_csaf

EPSS · bewertet 2026-10-27

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated---

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

  • Behobenkernel-devel-rt-0:5.14.21-150500.13.118.1.noarch as component of SUSE Linux Enterprise Micro 5.5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-rt-0:5.14.21-150500.13.118.1.x86_64 as component of SUSE Linux Enterprise Micro 5.5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-rt-0:5.14.21-150500.13.118.1.noarch as component of SUSE Linux Enterprise Micro 5.5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-rt-0:5.3.18-150300.232.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-rt-0:5.3.18-150300.232.1.noarch as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:5.3.18-150300.59.232.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:5.3.18-150300.59.232.1.s390x as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:5.3.18-150300.59.232.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:5.3.18-150300.59.232.1.150300.18.138.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:5.3.18-150300.59.232.1.150300.18.138.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-rt-0:5.14.21-150400.15.142.1.x86_64 as component of SUSE Linux Enterprise Micro 5.3suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-rt-0:5.14.21-150400.15.142.1.x86_64 as component of SUSE Linux Enterprise Micro 5.4suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-rt-0:5.14.21-150400.15.142.1.noarch as component of SUSE Linux Enterprise Micro 5.3suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-rt-0:5.14.21-150400.15.142.1.noarch as component of SUSE Linux Enterprise Micro 5.4suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobencluster-md-kmp-default-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobencluster-md-kmp-default-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobencluster-md-kmp-default-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobencluster-md-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobencluster-md-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobendlm-kmp-default-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobendlm-kmp-default-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobendlm-kmp-default-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobendlm-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobendlm-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobengfs2-kmp-default-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobengfs2-kmp-default-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobengfs2-kmp-default-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobengfs2-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobengfs2-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-base-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-devel-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-devel-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-devel-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-devel-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-devel-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-devel-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-devel-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-kgraft-devel-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-default-man-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-devel-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-devel-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-macros-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-macros-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-source-0:4.12.14-122.293.1.noarch as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-syms-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-syms-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-syms-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-syms-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkernel-syms-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkgraft-patch-4_12_14-122_293-default-0:1-8.3.1.ppc64le as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkgraft-patch-4_12_14-122_293-default-0:1-8.3.1.s390x as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenkgraft-patch-4_12_14-122_293-default-0:1-8.3.1.x86_64 as component of SUSE Linux Enterprise Live Patching 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenocfs2-kmp-default-0:4.12.14-122.293.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenocfs2-kmp-default-0:4.12.14-122.293.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenocfs2-kmp-default-0:4.12.14-122.293.1.s390x as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenocfs2-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5-LTSSsuse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

  • Behobenocfs2-kmp-default-0:4.12.14-122.293.1.x86_64 as component of SUSE Linux Enterprise Server LTSS Extended Security 12 SP5suse_csaf

    To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".

02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

8.8
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 5.5–8.8

v3.18.8highCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · ENISA EU
v3.18.8highCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HsecondaryAusnutzbarkeit 2.8 · Auswirkung 5.9
v3.18.1highCVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:Usecondary · CVSS-BT (t0sche)
v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · SUSE Product Security
03

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-416USLLM-abgeleitet
04

betroffene Produkte (36)

Betroffene Produkte und Versionsbereiche.

20 von 36 angezeigt
05

Advisories (6)

Hersteller- und Ökosystem-Meldungen dazu.

06

auch bekannt als (3)

Weitere Namen und Kennungen dieser Entität.

07

quellen

Welche Quellen diesen Datensatz belegen und wann.

veröffentlicht 2025-12-30geändert 2026-10-15
08

Referenzen (29)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan