Red Hat Security Advisory: php:7.2 security update
An update for the php:7.2 module is now available for Red Hat Enterprise Linux 8.0 Update Services for SAP Solutions. Red Hat Product Security has rated this update as having a security impact of Critical. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.
describes (1)
Related CVEs.
| ID | severity | exploitable | ||
|---|---|---|---|---|
| CVE-2019-11043US | critical9.8OT critical | KEV | ||
In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buff… | ||||
references
External citations — patches, advisories, analysis.
remediations (282)
- Fixedapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Fixedphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.
https://access.redhat.com/errata/RHSA-2020:0322 - Workaroundapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
- Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)
1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~
Advisories like this name the exposed products attackers go after on your perimeter. See what is exposed on your perimeter with a free passive scan.
Free scan