CVE-2019-11043

highpriority · act · 90OT risk · criticalKEV · exploitedEPSS 0.997 · 100 %ileexploit · functionalDEEURUUS
grimoire priorityP0 · Act now
Exploitable?
Yes · in the wild
CISA KEV · 31 exploits · functional
Likely / severe?
99.7% (100th) EPSS
CVSS 7.5 · high
Is it mine?
251 products
Check your exposure
Who says so?
6 sources
cnnvd · enisa_euvd · fstec_bdu · cisa_csaf_ot

added 2022-03-25remediate by 2022-04-15

required action Apply updates per vendor instructions.

EPSS · scored 2026-10-24

PHP FastCGI Process Manager (FPM) Buffer Overflow Vulnerability

In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • Fixedfesto_psirt

    FactoryViews (non-Lite): Upgrade to FactoryViews 1.6.0. See the upgrade guide for information on how to upgrade. FactoryViews Lite: Upgrade to FactoryViews 1.7.0. See the upgrade guide for information on how to upgrade.

  • FixedMES PCfesto_psirt

    Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.

  • Fixedapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Fixedphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • FixedMES PCcisa_csaf_ot

    Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.

  • FixedFuel-Boss V1 Backflush Systemscisa_csaf_ot

    No fix is planned for Fuel-Boss V1 Backflush Systems.

  • FixedFuel-Boss V1 Master/Slavecisa_csaf_ot

    Fixes are not yet available for the Fuel-Boss V1 Master/Slave.

  • FixedFuel-Boss V1 Portalcisa_csaf_ot

    Fixes are available for the Fuel-Boss V1 Standard and Fuel-Boss V1 Portal. Please contact All-Line Equipment Company (866-356-3336) for instructions on how to receive these fixes.

  • FixedFuel-Boss V1 Standardcisa_csaf_ot

    Fixes are available for the Fuel-Boss V1 Standard and Fuel-Boss V1 Portal. Please contact All-Line Equipment Company (866-356-3336) for instructions on how to receive these fixes.

  • MitigationFuel-Boss V1 Backflush Systemscisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Master/Slavecisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Portalcisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Standardcisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • Workaroundapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

02

cvss

Technical severity, 0–10. One row per scoring source.

9.8
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · high–critical · 7.5–9.8

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USexploitability 10 · impact 6.4
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hprimary · NVD / NIST USexploitability 3.9 · impact 5.9
v3.08.1highCVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · Red Hat Product Security US
v3.18.7highAV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · FSTEC (BDU) RU
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · ENISA EU
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · security@php.netexploitability 2.2 · impact 5.8
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · Festo PSIRT DE
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:Hsecondary · CVSS-BT (t0sche)
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · CISA US
03

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: active · Automatable: no · Technical Impact: totalcoordinatorcisa_ssvcUS
04

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-787USprimaryCWE-120USCWE-120USCWE-120USCWE-120USCWE-787USCWE-787USCWE-787US
05

exploits (31)

Public proof-of-concept and weaponised exploit code.

06

affected products (251)

Products and version ranges known to be affected.

showing 20 of 251
07

advisories (5)

Vendor and ecosystem advisories describing this.

  • FSA-202302Festo: Several vulnerabilities in FactoryViews2023-07-10csaf · festo_psirtDE

    FactoryViews bundles many third-party applications which are used in background processes to provide the software's features. From time to time, vulnerabilities in these bundled applications are discovered. These are typically fixed in newer versions of FactoryViews by updating the bundled applications. FactoryViews versions up to and including 1.5.2 contain around 200 such vulnerabilities listed in this advisory.Version 1.6.0 is a security rollup release which includes updates to all bundled applications and fixes these vulnerabilities. At this time, FactoryViews Lite cannot be updated beyond version 1.1. FactoryViews 1.7 unifies the non-Lite and Lite versions and fixes these vulnerabilities for users of FactoryViews Lite.

  • FSA-202402Several Vulnerabilities in MES PC (Windows 10)2024-02-27csaf · festo_psirtDE

    MES PCs shipped with Windows 10 come pre-installed with XAMPP. XAMPP is a bundle of third-party open-source applications including the Apache HTTP Server, the MariaDB database and more. From time to time, vulnerabilities in these applications are discovered. These are fixed in newer versions of XAMPP by updating the bundled applications. MES PCs shipped with Windows 10 include a copy of XAMPP which contains around 140 such vulnerabilities listed in this advisory. They can be fixed by replacing XAMPP with Festo Didactic's Factory Control Panel application.

  • RHSA-2020:0322Red Hat Security Advisory: php:7.2 security update2020-02-03csaf · redhat_csafUS

    An update for the php:7.2 module is now available for Red Hat Enterprise Linux 8.0 Update Services for SAP Solutions. Red Hat Product Security has rated this update as having a security impact of Critical. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • ICSA-26-027-02Festo Didactic SE MES PC2024-02-27icsa · cisa_csaf_otUS

    MES PCs shipped with Windows 10 come pre-installed with XAMPP. XAMPP is a bundle of third-party open-source applications including the Apache HTTP Server, the MariaDB database and more. From time to time, vulnerabilities in these applications are discovered. These are fixed in newer versions of XAMPP by updating the bundled applications. MES PCs shipped with Windows 10 include a copy of XAMPP which contains around 140 such vulnerabilities listed in this advisory. They can be fixed by replacing XAMPP with Festo Didactic's Factory Control Panel application.

  • ICSA-26-239-02All-Line Equipment Company Fuel-Boss2026-08-27icsa · cisa_csaf_otUS

    Successful exploitation of these vulnerabilities could allow attackers to execute arbitrary commands or code remotely on affected systems.

08

also known as (5)

Other names and identifiers for this entity.

09

sources

Which sources assert this record, and when.

cnnvdenisa_euvdfstec_bducisa_csaf_otfesto_psirtredhat_csafNVDCVE.orgMITRE
published 2019-10-28modified 2026-06-17
11

references (56)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan