CVE-2026-96596

mediumpriority · track · 0EPSS 0.002 · 11 %ileDEUS
grimoire priorityP3 · Track
Exploitable?
—
no known exploitation
Likely / severe?
0.21% (11th) EPSS
CVSS 5.9 · medium
Is it mine?
5 products
Check your exposure
Who says so?
2 sources
osv · cert_bund

EPSS · scored 2026-10-27

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member. When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected. hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3. This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to rebar3 from 3.27.1 before 3.28.0, and stdlib from 8.0 before 8.1.1, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1.

01

cvss

Technical severity, 0–10. One row per scoring source.

5.9
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · low–medium · 2.1–5.9

v4.05.9mediumCVSS:4.0/AV:L/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:Xsecondary
v4.02.1lowCVSS:4.0/AV:L/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:U/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:Xsecondary · CVSS-BT (t0sche)
02

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Trackcoordinatorcisa_ssvcUS
03

weaknesses

The CWE weakness classes this flaw belongs to.

04

affected products (5)

Products and version ranges known to be affected.

05

advisories (2)

Vendor and ecosystem advisories describing this.

  • WID-SEC-W-2026-3964Erlang/OTP: Mehrere SchwachstellenDeutsch2026-10-14csaf · cert_bundDE

    Ein Angreifer kann mehrere Schwachstellen in Erlang/OTP ausnutzen, um Sicherheitsvorkehrungen zu umgehen oder einen Denial of Service zu verursachen.

  • EEF-CVE-2026-96596erl_tar:extract/2 loops forever on a GNU sparse member with a trailing hole2026-10-14vendor · osvUS

    ## Summary Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (`erl_tar` module), hexpm hex_core (`hex_erl_tar` module), hexpm hex (`mix_hex_erl_tar` module) and erlang rebar3 (`r3_hex_erl_tar` module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member. When `erl_tar:extract/1,2` writes a member to disk, `erl_tar:stream_to_file_loop/3` reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, `erl_tar:do_sparse_read/3` matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The `{max_size, N}` option prevents this only when N is below the real size of the member. Extraction with the `memory` option is not affected. hex_core ships its own copy of `erl_tar` as `hex_erl_tar`, and Hex and rebar3 ship hex_core with prefixed module names (`mix_hex_erl_tar` and `r3_hex_erl_tar`). These copies contain the same code and do not call stdlib's `erl_tar`, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3. This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to rebar3 from 3.27.1 before 3.28.0, and stdlib from 8.0 before 8.1.1, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1. ## Details **1. Chunked extraction.** `erl_tar:extract/2` writes each member to disk through `stream_to_file_loop/3`. This function calls `do_read(Reader, ChunkSize)` until the `num_bytes` field of the reader is 0. The default chunk size is 65536 bytes. **2. Clause order in `do_sparse_read/3`.** For a sparse member, `do_read/2` calls `do_sparse_read/3`. The clause for a trailing hole matches when `sparse_map` is `[]` and `Pos < Size`. It comes before the clause that returns when `Len` is 0. **3. Unbounded recursion.** The member is a GNU sparse member (typeflag `S`) whose real size is larger than one chunk and whose sparse map ends before the real size. After the data fragments, the trailing-hole clause reads the rest of the chunk and recurses with `Len = 0`. The same clause matches again, and `read_sparse_hole/3` returns an empty binary and leaves `Pos` unchanged. The zero-length clause is never reached, so the call never returns. **4. No mitigation from `max_size`.** For a sparse member, `{max_size, N}` is checked against the real size from the header. It stops the loop only when N is below that size. `erl_tar:table/2` lists the member as `regular`, so a caller cannot skip sparse members by type. ## Proof of concept 1. Build a 2048-byte tar that holds one GNU sparse member (typeflag `S`). Give it a stored size of 4 bytes, one sparse map entry of 4 bytes at offset 0, and a real size of 1048576 bytes. Follow the 512-byte header with a 512-byte block that starts with the 4 data bytes, then 1024 zero bytes. 2. In a separate process, call `erl_tar:extract({binary, Tar}, [{cwd, Dir}])`. 3. The call does not return. After 5 seconds the process has used more than 10^9 reductions. On OTP 28 the same call returns `ok`. ## Impact An attacker who can get an application to extract a tar archive to disk keeps the extracting process and one scheduler busy forever. Each further archive occupies another scheduler, until the node stops responding. ## Workarounds Pass `{chunks, N}` together with `{max_size, N}`, with the same value N, to `erl_tar:extract/2`. Extraction then rejects any member larger than N, and reads each remaining member in one call, so the loop cannot occur. Alternatively, extract with the `memory` option and write the returned files to disk in the application.

06

also known as (1)

Other names and identifiers for this entity.

07

sources

Which sources assert this record, and when.

published 2026-10-14modified 2026-10-22
08

references (13) nvd

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan