CVE-2026-27662

highpriority · track · 0OT risk · elevatedEPSS 0.001 · 1 %ileDEEUNLRUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
0.11% (1st) EPSS
CVSS 7.7 · high
Is it mine?
287 products
Check your exposure
Who says so?
6 sources
cnnvd · enisa_euvd · fstec_bdu · cisa_csaf_ot

EPSS · scored 2026-10-27

Affected devices do not properly restrict access to the web browser via the Control Panel when no corresponding security mechanisms are in place. This could allow an unauthenticated attacker to gain unauthorized access to the web browser, potentially enabling the discovery of backdoors, performing unauthorized actions, or exploiting misconfigurations that may lead to further system compromise.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel (6AV2128-3KB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel hygienic (6AV2128-3KB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel hygienic neutral design (6AV2128-3KB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000, Unified Comfort Panel neutral (6AV2128-3KB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3MB27-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3MB27-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3MB27-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3MB57-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3MB57-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3MB57-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel (6AV2128-3MB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel hygienic (6AV2128-3MB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel hygienic neutral design (6AV2128-3MB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel neutral design (6AV2128-3MB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3QB27-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3QB27-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3QB27-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3QB57-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3QB57-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3QB57-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel (6AV2128-3QB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel hygienic (6AV2128-3QB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel hygienic neutral design (6AV2128-3QB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel neutral design (6AV2128-3QB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3UB27-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3UB27-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3UB27-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3UB57-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3UB57-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3UB57-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel (6AV2128-3UB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel hygienic (6AV2128-3UB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel hygienic neutral design (6AV2128-3UB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel neutral design (6AV2128-3UB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3XB27-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3XB27-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3XB27-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3XB57-1BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3XB57-0BX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3XB57-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Hygienic (6AV2128-3XB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Hygienic neutral design (6AV2128-3XB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Panel (6AV2128-3XB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Panel neutral design (6AV2128-3XB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB40-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB70-0AX0)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700, Unified Comfort Panel neutral design (6AV2128-3GB36-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel (6AV2128-3GB06-0AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP1000 Unified Comfort (6AG1128-3KB06-4AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP1200 Unified Comfort (6AG1128-3MB06-4AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP700 Unified Comfort (6AG1128-3GB06-4AX1)siemens_psirt

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel (6AV2128-3KB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel hygienic (6AV2128-3KB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000 Unified Comfort Panel hygienic neutral design (6AV2128-3KB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1000, Unified Comfort Panel neutral (6AV2128-3KB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3MB27-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3MB27-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3MB27-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3MB57-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3MB57-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3MB57-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel (6AV2128-3MB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel hygienic (6AV2128-3MB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel hygienic neutral design (6AV2128-3MB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1200 Unified Comfort Panel neutral design (6AV2128-3MB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3QB27-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3QB27-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3QB27-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3QB57-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3QB57-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3QB57-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel (6AV2128-3QB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel hygienic (6AV2128-3QB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel hygienic neutral design (6AV2128-3QB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1500 Unified Comfort Panel neutral design (6AV2128-3QB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3UB27-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3UB27-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3UB27-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3UB57-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3UB57-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3UB57-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel (6AV2128-3UB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel hygienic (6AV2128-3UB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel hygienic neutral design (6AV2128-3UB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP1900 Unified Comfort Panel neutral design (6AV2128-3UB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3XB27-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3XB27-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3XB27-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3XB57-1BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3XB57-0BX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3XB57-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Hygienic (6AV2128-3XB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Hygienic neutral design (6AV2128-3XB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Panel (6AV2128-3XB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP2200 Unified Comfort Panel neutral design (6AV2128-3XB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB40-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB70-0AX0)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700, Unified Comfort Panel neutral design (6AV2128-3GB36-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIMATIC HMI MTP700 Unified Comfort Panel (6AV2128-3GB06-0AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP1000 Unified Comfort (6AG1128-3KB06-4AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP1200 Unified Comfort (6AG1128-3MB06-4AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • FixedSIPLUS HMI MTP700 Unified Comfort (6AG1128-3GB06-4AX1)cisa_csaf_ot

    Update to V21 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109825605/
  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel (6AV2128-3KB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel hygienic (6AV2128-3KB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel hygienic neutral design (6AV2128-3KB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000, Unified Comfort Panel neutral (6AV2128-3KB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3MB27-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3MB27-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3MB27-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3MB57-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3MB57-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3MB57-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel (6AV2128-3MB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel hygienic (6AV2128-3MB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel hygienic neutral design (6AV2128-3MB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel neutral design (6AV2128-3MB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3QB27-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3QB27-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3QB27-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3QB57-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3QB57-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3QB57-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel (6AV2128-3QB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel hygienic (6AV2128-3QB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel hygienic neutral design (6AV2128-3QB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel neutral design (6AV2128-3QB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3UB27-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3UB27-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3UB27-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3UB57-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3UB57-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3UB57-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel (6AV2128-3UB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel hygienic (6AV2128-3UB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel hygienic neutral design (6AV2128-3UB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel neutral design (6AV2128-3UB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3XB27-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3XB27-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3XB27-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3XB57-1BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3XB57-0BX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3XB57-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Hygienic (6AV2128-3XB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Hygienic neutral design (6AV2128-3XB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Panel (6AV2128-3XB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Panel neutral design (6AV2128-3XB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB40-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB70-0AX0)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700, Unified Comfort Panel neutral design (6AV2128-3GB36-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel (6AV2128-3GB06-0AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP1000 Unified Comfort (6AG1128-3KB06-4AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP1200 Unified Comfort (6AG1128-3MB06-4AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP700 Unified Comfort (6AG1128-3GB06-4AX1)siemens_psirt

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel (6AV2128-3KB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel hygienic (6AV2128-3KB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000 Unified Comfort Panel hygienic neutral design (6AV2128-3KB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1000, Unified Comfort Panel neutral (6AV2128-3KB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3MB27-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3MB27-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3MB27-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3MB57-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3MB57-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3MB57-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel (6AV2128-3MB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel hygienic (6AV2128-3MB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel hygienic neutral design (6AV2128-3MB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1200 Unified Comfort Panel neutral design (6AV2128-3MB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3QB27-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3QB27-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3QB27-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3QB57-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3QB57-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3QB57-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel (6AV2128-3QB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel hygienic (6AV2128-3QB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel hygienic neutral design (6AV2128-3QB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1500 Unified Comfort Panel neutral design (6AV2128-3QB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3UB27-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3UB27-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3UB27-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3UB57-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3UB57-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3UB57-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel (6AV2128-3UB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel hygienic (6AV2128-3UB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel hygienic neutral design (6AV2128-3UB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP1900 Unified Comfort Panel neutral design (6AV2128-3UB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for stand (expandable, flange at the bottom) (6AV2128-3XB27-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for support arm (expandable, round tube) and extension unit (6AV2128-3XB27-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro for support arm (not extendable, flange on top) (6AV2128-3XB27-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for stand (expandable, flange at the bottom) (6AV2128-3XB57-1BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (expandable, round tube) and extensio (6AV2128-3XB57-0BX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (not extendable, flange on top) (6AV2128-3XB57-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Hygienic (6AV2128-3XB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Hygienic neutral design (6AV2128-3XB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Panel (6AV2128-3XB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP2200 Unified Comfort Panel neutral design (6AV2128-3XB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB40-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design (6AV2128-3GB70-0AX0)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700, Unified Comfort Panel neutral design (6AV2128-3GB36-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIMATIC HMI MTP700 Unified Comfort Panel (6AV2128-3GB06-0AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP1000 Unified Comfort (6AG1128-3KB06-4AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP1200 Unified Comfort (6AG1128-3MB06-4AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

  • MitigationSIPLUS HMI MTP700 Unified Comfort (6AG1128-3GB06-4AX1)cisa_csaf_ot

    Compliance with the security guidelines is strongly recommended (specially chapter “3.2 Ending HMI runtime”, “3.4.1 Enable access protection for the Control Panel” and “3.4.2 Changing runtime autostart) https://support.industry.siemens.com/cs/ww/en/view/109481300

02

cvss

Technical severity, 0–10. One row per scoring source.

7.7
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–high · 4.8–7.7

v3.17.7highCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Hsecondary · NCSC-NL NL
v3.17.7highAV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Hsecondary · FSTEC (BDU) RU
v3.17.7highCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Hsecondary · productcert@siemens.com DEexploitability 2.5 · impact 5.2
v3.17.7highCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Hsecondary · Siemens ProductCERT DE
v3.17.7highCVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Hsecondary · CISA US
v4.07highCVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:Nsecondary · ENISA EU
v4.07highCVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:Xsecondary · productcert@siemens.com DE
v4.04.8mediumCVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N/E:U/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:Xsecondary · CVSS-BT (t0sche)
03

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Trackcoordinatorcisa_ssvcUS
04

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-1188USCWE-1188USCWE-1188USCWE-1188USCWE-1188US
05

affected products (287)

Products and version ranges known to be affected.

showing 20 of 287
06

advisories (3)

Vendor and ecosystem advisories describing this.

  • NCSC-2026-0147Kwetsbaarheden verholpen in Siemens-productenNL2026-05-13csaf · ncsc_nlNL

    Siemens heeft kwetsbaarheden verholpen in verschillende (OT-)producten. Het gaat onder andere om producten in de Siemens RUGGEDCOM-, SCALANCE-, SIMATIC-, SIMIT-, SINAMICS-, SIPROTEC-, SENTRON- en Solid Edge-productreeksen.

  • SSA-387223SSA-387223: Unauthenticated Control Panel Escape Vulnerability on SIMATIC HMI Unified Comfort before V21.02026-05-12csaf · siemens_psirtDE

    SIMATIC HMI Unified Comfort Panels before V21.0 are affected by a vulnerability that allows an unauthenticated attacker to access the web browser via the help link. This vulnerability allows an attacker to access the web browser through the Control Panel if it is not protected by the corresponding security mechanisms. This opens the possibility for the attacker to find backdoors, which might lead to unwanted misconfigurations. Siemens has released new versions for the affected products and recommends to update to the latest versions.

  • ICSA-26-134-07Siemens SIMATIC2026-05-12icsa · cisa_csaf_otUS

    SIMATIC HMI Unified Comfort Panels before V21.0 are affected by a vulnerability that allows an unauthenticated attacker to access the web browser via the help link. This vulnerability allows an attacker to access the web browser through the Control Panel if it is not protected by the corresponding security mechanisms. This opens the possibility for the attacker to find backdoors, which might lead to unwanted misconfigurations. Siemens has released new versions for the affected products and recommends to update to the latest versions.

07

also known as (5)

Other names and identifiers for this entity.

08

sources

Which sources assert this record, and when.

cnnvdenisa_euvdfstec_bducisa_csaf_otncsc_nlsiemens_psirtNVDCVE.orgMITRE
published 2026-05-12modified 2026-10-26
09

references (4)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan