CVE-2026-20218

mediumpriority · track · 23EPSS 0.006 · 50 %ileNLUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.63% (50th) EPSS

CVSS 5.8 · medium

Is it mine?

467 products

Check your exposure

Who says so?

3 sources

cisco_csaf · ncsc_nl · zdi

EPSS · scored 2026-10-27

A vulnerability in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine of multiple Cisco products could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition.   This vulnerability is due to improper range checking when Snort 3 decompresses VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine of a targeted device. A successful exploit could allow the attacker to cause an overflow of stack data, which could result in a DoS condition.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixed17.12.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.3acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.4bcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5bcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.5dcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.7cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.7acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.7bcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.12.8cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.13.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.14.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.2acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.2ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.3acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.4ccisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.5acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.15.6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.16.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.17.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.1acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.3acisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed17.18.4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed26.1.1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed26.1.2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.10.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.12.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.13.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.14.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.15.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.16.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.17.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.18.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.19.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.20.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.21.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.22.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.23.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.24.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.25.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.27.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.28.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.29.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.30.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.31.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.32.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.36.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.38.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.39.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.40.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.41.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.42.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.43.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.45.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.47.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.48.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.50.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.51.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.52.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.53.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.55.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.56.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.57.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.58.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.59.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.6.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.60.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.61.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.62.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.63.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.64.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.65.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.67.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.69.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.7.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.70.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.71.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.72.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.73.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.74.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.75.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.76.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.77.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.78.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.8.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.81.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.82.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.83.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.84.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.1.9.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.10.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.10.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.10.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.11.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.12.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.12.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.2.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.3.7.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.5.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.6.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.7.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.8.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.0.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.1.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.2.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.6.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Fixed3.9.7.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 6100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
Workaround17.12.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.2cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.3cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.3acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.4bcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5bcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5ccisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.5dcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.6cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.7cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.7acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.7bcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.12.8cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.13.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.14.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.2acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.2ccisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.3cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.3acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.4cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.4ccisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.5cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.5acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.15.6cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.16.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.17.1cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.1acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.2cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.3acisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround17.18.4cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround26.1.1cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround26.1.2cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.10.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.12.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.13.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.14.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.15.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.16.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.17.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.18.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.19.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.20.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.21.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.22.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.23.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.24.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.25.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.27.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.28.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.29.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.3.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.30.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.31.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.32.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.36.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.38.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.39.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.4.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.40.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.41.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.42.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.43.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.45.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.47.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.48.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.5.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.50.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.51.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.52.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.53.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.55.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.56.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.57.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.58.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.59.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.6.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.60.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.61.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.62.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.63.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.64.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.65.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.67.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.69.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.7.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.70.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.71.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.72.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.73.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.74.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.75.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.76.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.77.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.78.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.8.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.81.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.82.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.83.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.84.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.1.9.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.10.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.10.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.10.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.11.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.12.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.12.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.2.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.3.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.4.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.5.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.3.7.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.5.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.6.3.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.3.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.7.4.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.8.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.0.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.1.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.2.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.3.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.5.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.6.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
Workaround3.9.7.0cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall 6100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 10.0.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.0.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.10.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.5.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.6 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.8.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.2.9 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.2.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.3 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.7 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.2.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.6.4 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.10.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 1200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.7.11 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. This vulnerability is due to VBA decompression, which is not enabled by default for any Snort 3 Inspector. If VBA decompression is disabled until the device can be upgraded to a fixed software release, the device will not be affected by this vulnerability. For more details on how to remove the VBA configuration, see the following references: Firewall Management Center Features in Version 7.2.0 ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#Cisco_Concept.dita_c09a8957-13ac-4b4e-bcae-a141acadd92d"] Snort 3 Inspector Reference ["https://www.cisco.com/go/snort3-inspectors"] Custom Snort 3 Intrusion Policies for Access Control ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/snort/720/snort3-configuration-guide-v72.html"] While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

cvss

Technical severity, 0–10. One row per scoring source.

5.8

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lprimary · psirt@cisco.com USexploitability 3.9 · impact 1.4

v3.15.3mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L/E:Usecondary · CVSS-BT (t0sche)

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lsecondary · NCSC-NL NL

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:Lsecondary · Cisco PSIRT US

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: none · Automatable: yes · Technical Impact: partialcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-121USCWE-121USCWE-121US

affected products (467)

Products and version ranges known to be affected.

showing 20 of 467

advisories (3)

Vendor and ecosystem advisories describing this.

NCSC-2026-0450Kwetsbaarheden verholpen in Snort 3 van CiscoNL2026-10-22csaf · ncsc_nlNL
Cisco heeft meerdere kwetsbaarheden verholpen in Snort 3, het open source intrusion detection en prevention systeem dat in diverse Cisco-producten wordt gebruikt.
cisco-sa-snort3-vba-bufdos-jAuFdvn9Multiple Cisco Products Snort 3 Visual Basic for Applications Buffer Overflow Denial of Service Vulnerability2026-10-21csaf · cisco_csafUS
A vulnerability in the Snort 3 Visual Basic for Applications (VBA) Decompression Engine of multiple Cisco products could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper range checking when Snort 3 decompresses VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine of a targeted device. A successful exploit could allow the attacker to cause an overflow of stack data, which could result in a DoS condition. Cisco has released software updates that address this vulnerability. There is a workaround that addresses this vulnerability. This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of October 21, 2026, Security Advisories ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-notice-QGwHnJ6k"]. In addition, for further documentation of improvements and fixes in Open Source Snort 3, see Multiple Cisco Products Snort 3 Security Hardening Release: October 2026 ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-hardening-snort3-ybgmhTQe"].
ZDI-26-788ZDI advisory ZDI-26-7882026-10-22vendor · zdiUS

sources

Which sources assert this record, and when.

cisco_csaf ncsc_nl zdi NVD CVE.org MITRE

published 2026-10-21modified 2026-10-22

references (1) nvd

External citations — patches, advisories, analysis.

https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort3-vba-bufdos-jAuFdvn9

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan