CVE-2025-40803
lowpriority · track · 0EPSS 0.002 · 7 %ileDEEUNLRUUSEPSS · scored 2026-10-26
A vulnerability has been identified in RUGGEDCOM RST2428P (6GK6242-6PA00) (All versions). The affected device exposes certain non-critical information from the device. This could allow an unauthenticated attacker to access sensitive data, potentially leading to a breach of confidentiality.
remediations
Vendor fix, mitigation, or workaround guidance, as published by each source.
No vendor fix yet; a mitigation is available.
- MitigationRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt
Create a firewall rule that blocks the UDP ports if not required. The device uses UDP 34964 and one port in range 49152-65535 for discovery protocols like LLDP, DCP, MRP etc.
- MitigationRUGGEDCOM RST2428P (6GK6242-6PA00)cisa_csaf_ot
Create a firewall rule that blocks the UDP ports if not required. The device uses UDP 34964 and one port in range 49152-65535 for discovery protocols like LLDP, DCP, MRP etc.
- No fix availableRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt
Currently no fix is available
- No fix availableRUGGEDCOM RST2428P (6GK6242-6PA00)cisa_csaf_ot
Currently no fix is available
cvss
Technical severity, 0–10. One row per scoring source.
base score 0–10 · higher = more severe · hover a vector to decode
ssvc
A stakeholder decision — act, attend, or track — from exploitation and impact.
weaknesses
The CWE weakness classes this flaw belongs to.
affected products (17)
Products and version ranges known to be affected.
- siemens ruggedcom rst2428p firmwareall versionsnvdUScpe:2.3:o:siemens:ruggedcom_rst2428p_firmware:*:*:*:*:*:*:*:*
advisories (3)
Vendor and ecosystem advisories describing this.
- NCSC-2025-0274Kwetsbaarheden verholpen in Siemens productenNL2025-09-09csaf · ncsc_nlNL
Siemens heeft kwetsbaarheden verholpen in diverse producten als Apogee, Industial Edge, RUGGEDCOM, SIMATIC, SIMOTION en SINAMICS.
- SSA-494539SSA-494539: Multiple Vulnerabilities in SINEC OS2025-09-09csaf · siemens_psirtDE
SINEC OS is affected by multiple vulnerabilities due to open UDP ports, which could allow an attacker to access non-sensitive information without authentication or potentially cause temporary denial of service. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
- ICSA-25-254-04Siemens SINEC OS2025-09-09icsa · cisa_csaf_otUS
SINEC OS is affected by multiple vulnerabilities due to open UDP ports, which could allow an attacker to access non-sensitive information without authentication or potentially cause temporary denial of service. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
also known as (4)
Other names and identifiers for this entity.
sources
Which sources assert this record, and when.
references (4)
External citations — patches, advisories, analysis.
- https://cert-portal.siemens.com/productcert/html/ssa-494539.htmlcnnvd
- https://support.industry.siemens.com/cs/document/109977557/firmware-update-for-sinec-os-firmware-version-3-1?lc=en-SGPatchcnnvd
- https://cert-portal.siemens.com/productcert/html/ssa-494539.htmlenisa_euvd
- https://cert-portal.siemens.com/productcert/html/ssa-494539.htmlVendor Advisorynvd
Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.
Free scan