CVE-2025-21694
mediumEPSS 0.002 · 14 %ileDEEURUUSEPSS · scored 2026-10-17
In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix softlockup in __read_vmcore (part 2) Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck. The second loop in __read_vmcore has a lot more opportunities for natural sleep points, like scheduling out while waiting for a data write to happen, but apparently that is not always enough. Add a cond_resched() to the second loop in __read_vmcore to (hopefully) get rid of the softlockups.
remediations
Vendor fix, mitigation, or workaround guidance, as published by each source.
A vendor fix is available.
- FixedRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt
Update to V3.2 or later version
https://support.industry.siemens.com/cs/ww/en/view/109988839/ - FixedSCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 familysiemens_psirt
See Section Additional Information.
- FixedSCALANCE XCM-/XRM-/XCH-/XRH-300 familysiemens_psirt
Update to V3.2 or later version
https://support.industry.siemens.com/cs/ww/en/view/109988839/ - FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= V3.1.0 < V3.1.5siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= V3.1.0 < V3.1.5siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= V3.1.0 < V3.1.5siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= V3.1.0 < V3.1.5siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= V3.1.0 < V3.1.5siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - MitigationSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
- No fix availableSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Currently no fix is available
cvss
Technical severity, 0–10. One row per scoring source.
base score 0–10 · higher = more severe · hover a vector to decode
ssvc
A stakeholder decision — act, attend, or track — from exploitation and impact.
weaknesses
The CWE weakness classes this flaw belongs to.
affected products (54)
Products and version ranges known to be affected.
advisories (8)
Vendor and ecosystem advisories describing this.
- SSA-265688SSA-265688: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.12024-04-09csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 TM MFP V1.1 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V1.1 only; for version V1.1.1 refer to SSA-784472.
- SSA-355557SSA-355557: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.22025-08-12csaf · siemens_psirtDE
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- SSA-398330SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.52023-12-12csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
- WID-SEC-W-2025-0362Linux Kernel: Mehrere SchwachstellenDeutsch2025-02-12csaf · cert_bundDE
Ein lokaler Angreifer kann diese Schwachstellen ausnutzen, um einen Denial-of-Service-Zustand oder andere nicht spezifizierte Effekte zu erzeugen.
- WID-SEC-W-2025-2855IBM DataPower Gateway: Mehrere SchwachstellenDeutsch2025-12-15csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen in IBM DataPower Gateway ausnutzen, um beliebigen Programmcode auszuführen, Daten zu manipulieren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand zu verursachen oder andere, nicht spezifizierte Angriffe durchzuführen.
- ICSA-23-348-10Siemens SIMATIC S7-15002023-12-12icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
- ICSA-24-102-01Siemens SIMATIC S7-1500 TM MFP2024-04-09icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
- ICSA-25-226-07Siemens Third-Party Components in SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
also known as (4)
Other names and identifiers for this entity.
sources
Which sources assert this record, and when.
references (27)
External citations — patches, advisories, analysis.
- https://git.kernel.org/stable/c/649b266606bc413407ce315f710c8ce8a88ee30acnnvd
- https://git.kernel.org/stable/c/65c367bd9d4f43513c7f837df5753bea9561b836cnnvd
- https://git.kernel.org/stable/c/80828540dad0757b6337c6561d49c81038f38d87cnnvd
- https://git.kernel.org/stable/c/80da29deb88a3a907441fc35bb7bac309f31e713cnnvd
- https://git.kernel.org/stable/c/84c4ed15626574c9ac6c1039ba9c137a77bcc7f2cnnvd
- https://git.kernel.org/stable/c/a5a2ee8144c3897d37403a69118c3e3dc5713958cnnvd
- https://git.kernel.org/stable/c/cbc5dde0a461240046e8a41c43d7c3b76d5db952cnnvd
- https://vigilance.fr/vulnerability/Linux-kernel-multiple-vulnerabilities-dated-13-02-2025-46387cnnvd
Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.
Free scan