CVE-2024-44965

mediumpriority · track · 22EPSS 0.002 · 13 %ileDEEURUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.22% (13th) EPSS

CVSS 5.5 · medium

Is it mine?

81 products

Check your exposure

Who says so?

6 sources

cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-27

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
FixedSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Only build and run applications from trusted sources.

cvss

Technical severity, 0–10. One row per scoring source.

5.5

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hprimary · NVD / NIST USexploitability 1.8 · impact 3.6

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · CISA US

v3.15.5mediumAV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · FSTEC (BDU) RU

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · Siemens ProductCERT DE

v3.15.1mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:Usecondary · CVSS-BT (t0sche)

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Trackcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-119USCWE-229USCWE-229US

affected products (81)

Products and version ranges known to be affected.

Amazon Linux 2all versionscert_bundDEcpe:/o:amazon:linux_2:-
Broadcom Brocade SANnavall versionscert_bundDEcpe:/a:broadcom:brocade_sannav:-
Debian Linuxall versionscert_bundDEcpe:/o:debian:debian_linux:-
Dell Avamarall versionscert_bundDEcpe:/a:dell:avamar:-
Dell NetWorker Virtual Editionall versionscert_bundDEcpe:/a:dell:networker:virtual_edition
IBM InfoSphere Guardiumall versionscert_bundDEcpe:/a:ibm:infosphere_guardium:-
IBM Security Guardium 12.0all versionscert_bundDEcpe:/a:ibm:security_guardium:12.0
Open Source Linux Kernelall versionscert_bundDEcpe:/o:linux:linux_kernel:-
Oracle Linuxall versionscert_bundDEcpe:/o:oracle:linux:-
Oracle VM 3all versionscert_bundDEcpe:/a:oracle:vm:3
RESF Rocky Linuxall versionscert_bundDEcpe:/o:resf:rocky_linux:-
Red Hat Enterprise Linuxall versionscert_bundDEcpe:/o:redhat:enterprise_linux:-
SUSE Linuxall versionscert_bundDEcpe:/o:suse:suse_linux:-
Ubuntu Linuxall versionscert_bundDEcpe:/o:canonical:ubuntu_linux:-
IBM QRadar SIEM< 7.5.0 UP11cert_bundDE
RUGGEDCOM RST2428P (6GK6242-6PA00)all versionsnot affectedcisa_csaf_otUS
SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 familyall versionsnot affectedcisa_csaf_otUS
SCALANCE XCM-/XRM-/XCH-/XRH-300 familyall versionsnot affectedcisa_csaf_otUS
Siemens RUGGEDCOM RST2428P (6GK6242-6PA00)≤ vers:all/*not affectedcisa_csaf_otUS
Siemens SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family≤ vers:all/*not affectedcisa_csaf_otUS

showing 20 of 81

advisories (5)

Vendor and ecosystem advisories describing this.

SSA-355557SSA-355557: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.22025-08-12csaf · siemens_psirtDE
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
SSA-398330SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.52023-12-12csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
WID-SEC-W-2024-2057Linux Kernel: Mehrere Schwachstellen ermöglichen Denial of Service oder unspezifischer AngriffDeutsch2024-09-04csaf · cert_bundDE
Ein lokaler Angreifer kann mehrere Schwachstellen in Linux Kernel ausnutzen, um einen Denial of Service Angriff durchzuführen oder weitere unspezifische Angriffe durchzuführen.
ICSA-23-348-10Siemens SIMATIC S7-15002023-12-12icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
ICSA-25-226-07Siemens Third-Party Components in SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.

also known as (4)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd fstec_bdu cert_bund cisa_csaf_ot siemens_psirt NVD CVE.org MITRE

published 2024-09-04modified 2026-10-15

references (30)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan