CVE-2024-42082
mediumpriority · track · 22EPSS 0.002 · 15 %ileDEEUNLRUUSEPSS · scored 2026-10-24
In the Linux kernel, the following vulnerability has been resolved: xdp: Remove WARN() from __xdp_reg_mem_model() syzkaller reports a warning in __xdp_reg_mem_model(). The warning occurs only if __mem_id_init_hash_table() returns an error. It returns the error in two cases: 1. memory allocation fails; 2. rhashtable_init() fails when some fields of rhashtable_params struct are not initialized properly. The second case cannot happen since there is a static const rhashtable_params struct with valid fields. So, warning is only triggered when there is a problem with memory allocation. Thus, there is no sense in using WARN() to handle this error and it can be safely removed. WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 Call Trace: xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344 xdp_test_run_setup net/bpf/test_run.c:188 [inline] bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377 bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267 bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649 __do_sys_bpf kernel/bpf/syscall.c:5738 [inline] __se_sys_bpf kernel/bpf/syscall.c:5736 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Found by Linux Verification Center (linuxtesting.org) with syzkaller.
remediations
Vendor fix, mitigation, or workaround guidance, as published by each source.
A vendor fix is available.
- FixedSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Update to V1.1.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109827684/ - FixedRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - FixedSCALANCE XCM-/XRM-/XCH-/XRH-300 familysiemens_psirt
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - FixedRUGGEDCOM RST2428P (6GK6242-6PA00)cisa_csaf_ot
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - FixedSCALANCE XCM-/XRM-/XCH-/XRH-300 familycisa_csaf_ot
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - MitigationSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
- MitigationSIMATIC S7-1500 TM MFP - GNU/Linux subsystemcisa_csaf_ot
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
- No fix availableSIMATIC S7-1500 TM MFP - GNU/Linux subsystemcisa_csaf_ot
Currently no fix is available
cvss
Technical severity, 0–10. One row per scoring source.
base score 0–10 · higher = more severe · hover a vector to decode
ssvc
A stakeholder decision — act, attend, or track — from exploitation and impact.
weaknesses
The CWE weakness classes this flaw belongs to.
affected products (83)
Products and version ranges known to be affected.
- Dell PowerProtect Data Domain Management Centerall versionscert_bundDEcpe:/a:dell:powerprotect_data_domain_management_center:-
- NetApp ActiveIQ Unified Manager for VMware vSphereall versionscert_bundDEcpe:/a:netapp:active_iq_unified_manager:for_vmware_vsphere
advisories (8)
Vendor and ecosystem advisories describing this.
- NCSC-2024-0339Kwetsbaarheden verholpen in Microsoft MarinerNL2024-08-13csaf · ncsc_nlNL
Microsoft heeft kwetsbaarheden verholpen in Mariner (Azure Linux).
- SSA-265688SSA-265688: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.12024-04-09csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 TM MFP V1.1 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V1.1 only; for version V1.1.1 refer to SSA-784472.
- SSA-355557SSA-355557: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.22025-08-12csaf · siemens_psirtDE
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- SSA-613116SSA-613116: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.12025-08-12csaf · siemens_psirtDE
SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- WID-SEC-W-2024-1722Linux Kernel: Mehrere Schwachstellen ermöglichen nicht spezifizierten AngriffDeutsch2024-07-29csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um einen nicht näher spezifizierten Angriff durchzuführen.
- ICSA-24-102-01Siemens SIMATIC S7-1500 TM MFP2024-04-09icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
- ICSA-25-226-07Siemens Third-Party Components in SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- ICSA-25-226-15Siemens SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
also known as (6)
Other names and identifiers for this entity.
sources
Which sources assert this record, and when.
references (23)
External citations — patches, advisories, analysis.
- https://cxsecurity.com/cveshow/CVE-2024-42082/cnnvd
- https://git.kernel.org/stable/c/1095b8efbb13a6a5fa583ed373ee1ccab29da2d0cnnvd
- https://git.kernel.org/stable/c/14e51ea78b4ccacb7acb1346b9241bb790a2054ccnnvd
- https://git.kernel.org/stable/c/1d3e3b3aa2cbe9bc7db9a7f8673a9fa6d2990d54cnnvd
- https://git.kernel.org/stable/c/4e0c539ee265d5c6e7fa7d229cd4aa7bc01816e2cnnvd
- https://git.kernel.org/stable/c/7e9f79428372c6eab92271390851be34ab26bfb4cnnvd
- https://git.kernel.org/stable/c/f92298b0467fd77edc4c1a2c3e48833e69840ec4cnnvd
- https://git.kernel.org/stable/c/1095b8efbb13a6a5fa583ed373ee1ccab29da2d0enisa_euvd
Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.
Free scan