CVE-2024-34397

mediumpriority · track · 0EPSS 0.008 · 55 %ileDEEUFRNLRUUS
grimoire priorityP3 · Track
Exploitable?
—
no known exploitation
Likely / severe?
0.76% (55th) EPSS
CVSS 5.2 · medium
Is it mine?
136 products
Check your exposure
Who says so?
8 sources
cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-27

An issue was discovered in GNOME GLib before 2.78.5, and 2.79.x and 2.80.x before 2.80.1. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service. This could lead to the GDBus-based client behaving incorrectly, with an application-dependent impact.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • FixedRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt

    Update to V3.1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109977557/
  • FixedSCALANCE XCM-/XRM-/XCH-/XRH-300 familysiemens_psirt

    Update to V3.1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109977557/
  • FixedRUGGEDCOM RST2428P (6GK6242-6PA00)cisa_csaf_ot

    Update to V3.1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109977557/
  • FixedSCALANCE XCM-/XRM-/XCH-/XRH-300 familycisa_csaf_ot

    Update to V3.1 or later version

    https://support.industry.siemens.com/cs/ww/en/view/109977557/
  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • No fix availableSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt

    Currently no fix is available

  • No fix availableSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot

    Currently no fix is available

  • No fix availableSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot

    Currently no fix is available

  • No fix availableSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot

    Currently no fix is available

02

cvss

Technical severity, 0–10. One row per scoring source.

7.5
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · low–high · 3.8–7.5

v3.15.2mediumCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Lsecondary · CISA US
v3.13.8lowAV:L/AC:L/PR:L/UI:N/S:C/C:N/I:L/A:Nsecondary · FSTEC (BDU) RU
v3.15.2mediumCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Lsecondary · ENISA EU
v3.15.2mediumCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Lsecondaryexploitability 0.9 · impact 4.2
v3.15.2mediumCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Lsecondary · Siemens ProductCERT DE
v3.14.8mediumCVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L/E:Usecondary · CVSS-BT (t0sche)
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:Nsecondary · NCSC-NL NL
03

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Trackcoordinatorcisa_ssvcUS
04

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-20USCWE-20USCWE-290USCWE-290USCWE-940USCWE-940US
05

affected products (136)

Products and version ranges known to be affected.

showing 20 of 136
06

advisories (8)

Vendor and ecosystem advisories describing this.

  • NCSC-2025-0187Kwetsbaarheden verholpen in Siemens productenNL2025-06-10csaf · ncsc_nlNL

    Siemens heeft kwetsbaarheden verholpen in diverse producten als RUGGEDCOM, SCALANCE, SIMATIC en Tecnomatix

  • SSA-082556SSA-082556: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.52025-06-10csaf · siemens_psirtDE

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.5 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1.5 only; for version V3.1.6 refer to SSA-019113.

  • SSA-613116SSA-613116: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.12025-08-12csaf · siemens_psirtDE

    SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.

  • WID-SEC-W-2024-2074Red Hat Enterprise Linux (glib2): Schwachstelle ermöglicht Manipulation von DateienDeutsch2024-09-08csaf · cert_bundDE

    Ein lokaler Angreifer kann eine Schwachstelle in Red Hat Enterprise Linux ausnutzen, um Dateien zu manipulieren.

  • WID-SEC-W-2025-1905IBM QRadar SIEM Komponente: Mehrere SchwachstellenDeutsch2025-08-25csaf · cert_bundDE

    Ein Angreifer kann mehrere Schwachstellen in IBM QRadar SIEM Komponenten ausnutzen, um Daten zu manipulieren, um einen Denial of Service Angriff durchzuführen, um beliebigen Programmcode auszuführen, um Sicherheitsvorkehrungen zu umgehen, und um Informationen offenzulegen.

  • ICSA-25-162-05Siemens SIMATIC S7-1500 CPU family2025-06-10icsa · cisa_csaf_otUS

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fix versions and recommends countermeasures for products where fixes are not, or not yet available.

  • ICSA-25-226-15Siemens SINEC OS2025-08-12icsa · cisa_csaf_otUS

    SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.

  • CERTFR-2026-AVI-1385Multiples vulnérabilités dans les produits VMwareFrançais2026-10-26vendor · certfrFR
07

also known as (4)

Other names and identifiers for this entity.

08

sources

Which sources assert this record, and when.

cnnvdenisa_euvdfstec_bducert_bundcisa_csaf_otncsc_nlsiemens_psirtcertfrNVDCVE.orgMITRE
published 2024-05-07modified 2026-06-17
09

references (27)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan