CVE-2024-20329

criticalpriority · track · 0EPSS 0.012 · 67 %ileDEEUNLRUUS

grimoire priorityP2 · Scheduled

Exploitable?

—

no known exploitation

Likely / severe?

1.15% (67th) EPSS

CVSS 9.9 · critical

Is it mine?

270 products

Check your exposure

Who says so?

6 sources

cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-27

A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

cvss

Technical severity, 0–10. One row per scoring source.

9.9

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.19.9criticalAV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:Hsecondary · FSTEC (BDU) RU

v3.19.9criticalCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:Hsecondary · ENISA EU

v3.19.9criticalCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:Hsecondary · psirt@cisco.com USexploitability 3.1 · impact 6

v3.19.1criticalCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:Usecondary · CVSS-BT (t0sche)

v3.19.9criticalCVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:Hsecondary · Cisco PSIRT US

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: none · Automatable: no · Technical Impact: totalcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-146USCWE-146USCWE-146US

affected products (270)

Products and version ranges known to be affected.

showing 20 of 270

advisories (3)

Vendor and ecosystem advisories describing this.

NCSC-2024-0424Kwetsbaarheden verholpen in Cisco Adaptive Security Appliance en Firepower Threat DefenseNL2024-10-24csaf · ncsc_nlNL
Cisco heeft kwetsbaarheden verholpen in Adaptive Security Appliance (ASA) en Firepower Threat Defense (FTD).
WID-SEC-W-2024-3261Cisco ASA (Adaptive Security Appliance): Mehrere SchwachstellenDeutsch2024-10-23csaf · cert_bundDE
Ein entfernter, authentisierter oder anonymer Angreifer kann mehrere Schwachstellen in Cisco ASA (Adaptive Security Appliance) ausnutzen, um beliebigen Programmcode mit Administratorrechten auszuführen und einen Denial-of-Service-Zustand zu erzeugen.
cisco-sa-asa-ssh-rce-gRAuPEUFCisco Adaptive Security Appliance Software SSH Remote Command Injection Vulnerability2024-10-23csaf · cisco_csafUS
A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].

also known as (4)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd fstec_bdu cert_bund cisco_csaf ncsc_nl NVD CVE.org MITRE

published 2024-10-23modified 2026-06-17

references (10)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan