CVE-2024-20293

mediumpriority · track · 0EPSS 0.004 · 34 %ileDEEUNLRUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.40% (34th) EPSS

CVSS 5.8 · medium

Is it mine?

128 products

Check your exposure

Who says so?

6 sources

cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-27

A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.20.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.20.1.5 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
FixedCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.22 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.24 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.20.1 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.20.1.5 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.0 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.1 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.3.1.2 when installed on Cisco Secure Firewall Threat Defense Virtualcisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
WorkaroundCisco Secure Firewall Threat Defense (FTD) Software 7.4.0 when installed on Cisco Secure Firewall 4200 Seriescisco_csaf
There is a workaround that addresses this vulnerability. The access list that is not working can be removed and reconfigured to work around this vulnerability. Use the example configuration from the Vulnerable Products ["#vp"] section of this advisory to execute the following CLI commands: device# no access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 device# access-list CSM_FW_ACL_ extended permit ip host 192.168.1.1 object-group sample1 While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

cvss

Technical severity, 0–10. One row per scoring source.

5.8

010

base score 0–10 · higher = more severe · hover a vector to decode

v3.15.8mediumAV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · FSTEC (BDU) RU

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · ENISA EU

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · psirt@cisco.com USexploitability 3.9 · impact 1.4

v3.15.3mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:N/E:Usecondary · CVSS-BT (t0sche)

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · NCSC-NL NL

v3.15.8mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:Nsecondary · Cisco PSIRT US

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: none · Automatable: yes · Technical Impact: totalcoordinatorcisa_ssvcUS

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-436USCWE-436USCWE-436US

affected products (128)

Products and version ranges known to be affected.

showing 20 of 128

advisories (3)

Vendor and ecosystem advisories describing this.

NCSC-2024-0233Kwetsbaarheden verholpen in Cisco productenNL2024-05-23csaf · ncsc_nlNL
Cisco heeft kwetsbaarheden verholpen in ASA, Firepower en Snort.
WID-SEC-W-2024-1225Cisco Firepower und ASA: Mehrere Schwachstellen ermöglichen Umgehen von SicherheitsvorkehrungenDeutsch2024-05-22csaf · cert_bundDE
Ein entfernter Angreifer kann mehrere Schwachstellen in Cisco Firepower und Cisco ASA (Adaptive Security Appliance) ausnutzen, um Sicherheitsvorkehrungen zu umgehen.
cisco-sa-asaftd-ogsnsg-aclbyp-3XB8q6jXCisco Adaptive Security Appliance and Firepower Threat Defense Software Inactive-to-Active ACL Bypass Vulnerability2024-05-22csaf · cisco_csafUS
A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface. Cisco has released software updates that address this vulnerability. There is a workaround that addresses this vulnerability. This advisory is part of the May 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: May 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75298"].

also known as (4)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

cnnvd enisa_euvd fstec_bdu cert_bund cisco_csaf ncsc_nl NVD CVE.org MITRE

published 2024-05-22modified 2026-08-11

references (5)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan