CVE-2023-46728

highpriority · track · 32EPSS 0.060 · 93 %ileDEEURUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
5.96% (93rd) EPSS
CVSS 7.5 · high
Is it mine?
134 products
Check your exposure
Who says so?
5 sources
cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · scored 2026-10-27

Squid is a caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to a NULL pointer dereference bug Squid is vulnerable to a Denial of Service attack against Squid's Gopher gateway. The gopher protocol is always available and enabled in Squid prior to Squid 6.0.1. Responses triggering this bug are possible to be received from any gopher server, even those without malicious intent. Gopher support has been removed in Squid version 6.0.1. Users are advised to upgrade. Users unable to upgrade should reject all gopher URL requests.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • Fixedlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Fixedsquid-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-7:5.5-6.el9_3.5.src as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debuginfo-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debuginfo-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debuginfo-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debuginfo-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debugsource-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debugsource-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debugsource-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-debugsource-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Fixedsquid-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-migration-script-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-sysvinit-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Fixedsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.src as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

02

cvss

Technical severity, 0–10. One row per scoring source.

7.5
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–high · 6.9–7.5

v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hprimary · NVD / NIST USexploitability 3.9 · impact 3.6
v3.17.5highAV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · FSTEC (BDU) RU
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · ENISA EU
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · security-advisories@github.comexploitability 3.9 · impact 3.6
v3.16.9mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:Usecondary · CVSS-BT (t0sche)
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · Red Hat Product Security US
03

ssvc

A stakeholder decision — act, attend, or track — from exploitation and impact.

Exploitation: none · Automatable: yes · Technical Impact: partialcoordinatorcisa_ssvcUS
04

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-476USCWE-476USCWE-476US
05

affected products (134)

Products and version ranges known to be affected.

showing 20 of 134
06

advisories (5)

Vendor and ecosystem advisories describing this.

  • RHSA-2024:0046Red Hat Security Advisory: squid:4 security update2024-01-03csaf · redhat_csafUS

    An update for the squid:4 module is now available for Red Hat Enterprise Linux 8. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • RHSA-2024:0071Red Hat Security Advisory: squid security update2024-01-08csaf · redhat_csafUS

    An update for squid is now available for Red Hat Enterprise Linux 9. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • RHSA-2024:1787Red Hat Security Advisory: squid security update2024-04-11csaf · redhat_csafUS

    An update for squid is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • WID-SEC-W-2023-2837Squid: Schwachstelle ermöglicht Denial of ServiceDeutsch2023-11-06csaf · cert_bundDE

    Ein entfernter, anonymer Angreifer kann eine Schwachstelle in Squid ausnutzen, um einen Denial of Service Angriff durchzuführen.

  • WID-SEC-W-2024-1248Xerox FreeFlow Print Server: Mehrere SchwachstellenDeutsch2024-05-28csaf · cert_bundDE

    Ein Angreifer kann mehrere Schwachstellen in Xerox FreeFlow Print Server ausnutzen, um die Vertraulichkeit, Verfügbarkeit und Integrität des Systems zu gefährden

07

also known as (3)

Other names and identifiers for this entity.

08

sources

Which sources assert this record, and when.

cnnvdenisa_euvdfstec_bducert_bundredhat_csafNVDCVE.orgMITRE
published 2023-11-06modified 2026-06-17
09

references (19)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan