CVE-2022-42916
highpriority · track · 31OT risk · elevatedEPSS 0.025 · 85 %ileDEEURUUSEPSS · scored 2026-10-27
In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.
remediations
Vendor fix, mitigation, or workaround guidance, as published by each source.
A vendor fix is available.
- FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSINEC NMSsiemens_psirt
Update to V1.0.3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109818269/ - Fixedphoenix_contact_psirt
Update to the latest 2023.0.0 LTS Firmware Release. PHOENIX CONTACT recommends to always use an up-to-date version of the PLCnext Engineer.
- FixedSINEC NMScisa_csaf_ot
Update to V1.0.3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109818269/ - FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - FixedSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/ - Mitigationphoenix_contact_psirt
Phoenix Contact recommends operating network-capable devices in closed networks or protected with a suitable firewall. For detailed information on our recommendations for measures to protect network-capable devices, please refer to our application note: Measures to protect network-capable devices with Ethernet connection
- MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
- MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
- MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
- MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
- MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
cvss
Technical severity, 0–10. One row per scoring source.
base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–critical · 6.9–9.1
ssvc
A stakeholder decision — act, attend, or track — from exploitation and impact.
weaknesses
The CWE weakness classes this flaw belongs to.
affected products (67)
Products and version ranges known to be affected.
- Xerox FreeFlow Print Server v7 for Solarisall versionscert_bundDEcpe:/a:xerox:freeflow_print_server:v7_for_solaris
- Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)≤ vers:intdot/>=3.1.0|<3.1.5cisa_csaf_otUS
- Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)≤ vers:intdot/>=3.1.0|<3.1.5cisa_csaf_otUS
- Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)≤ vers:intdot/>=3.1.0|<3.1.5cisa_csaf_otUS
- Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)≤ vers:intdot/>=3.1.0|<3.1.5cisa_csaf_otUS
- Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)≤ vers:intdot/>=3.1.0|<3.1.5cisa_csaf_otUS
advisories (18)
Vendor and ecosystem advisories describing this.
- SSA-398330SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.52023-12-12csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
- SSA-892048SSA-892048: Third-Party Component Vulnerabilities in SINEC NMS before V1.0.3.12023-05-09csaf · siemens_psirtDE
Multiple vulnerabilities affecting third-party components libexpat and libcurl of SINEC NMS before V1.0.3.1 could allow an attacker to impact SINEC NMS confidentiality, integrity and availability. Siemens has released an update for SINEC NMS and recommends to update to the latest version.
- VDE-2023-001PHOENIX CONTACT: Multiple Vulnerabilities in PLCnext Firmware2023-02-14csaf · phoenix_contact_psirtDE
A new LTS Firmware release fixes known vulnerabilities in used open-source libraries. In addition, the following improvements have been implemented: HMI - Hardening against DoS attacks. - Hardening against memory leak problems in case of network attacks. WBM - Umlauts in the password of the 'User Manager' were not handled correctly. The password rule for upper and lower case was not followed. This could lead to unintentionally weaker passwords.- Hardening of WBM against Cross-Site-Scripting. User Manager - In security notifications 'SecurityToken' was always displayed as '0000000' when creating or modifying users.- Hardening of Trust and Identity Stores.
- WID-SEC-W-2022-1862cURL: Mehrere SchwachstellenDeutsch2022-10-25csaf · cert_bundDE
Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in cURL ausnutzen, um einen Denial of Service zu verursachen, Informationen offenzulegen oder weitere, nicht näher spezifizierte Angriffe durchzuführen.
- WID-SEC-W-2022-2372genua genugate: Mehrere SchwachstellenDeutsch2022-12-19csaf · cert_bundDE
Ein entfernter, anonymer Angreifer kann einige der mehreren Schwachstellen in Komponenten von Drittanbietern ausnutzen, die von genua genugate verwendet werden, um Informationen offenzulegen und potentiell weitere, unbekannte Auswirkungen zu erzielen.
- WID-SEC-W-2023-0189Apple macOS: Mehrere SchwachstellenDeutsch2023-01-23csaf · cert_bundDE
Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in Apple macOS ausnutzen, um beliebigen Programmcode mit Administratorrechten auszuführen, seine Privilegien erweitern, beliebigen Programmcode auszuführen, Informationen offenzulegen, Sicherheitsvorkehrungen zu umgehen oder einen Denial of Service Zustand herbeizuführen.
- WID-SEC-W-2023-0296Meinberg LANTIME: Mehrere SchwachstellenDeutsch2023-02-06csaf · cert_bundDE
Ein lokaler Angreifer kann mehrere Schwachstellen in Meinberg LANTIME ausnutzen, um seine Privilegien zu erhöhen, um einen Denial of Service Zustand herbeizuführen und um nicht näher beschriebene Auswirkungen zu verursachen.
- WID-SEC-W-2023-1026Oracle Virtualization: Mehrere SchwachstellenDeutsch2023-04-18csaf · cert_bundDE
Ein entfernter, anonymer oder lokaler Angreifer kann mehrere Schwachstellen in Oracle Virtualization ausnutzen, um die Vertraulichkeit, Integrität und Verfügbarkeit zu gefährden.
- WID-SEC-W-2023-1350Splunk Splunk Enterprise: Mehrere Schwachstellen in Komponenten von DrittanbieternDeutsch2023-06-01csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen in Splunk Splunk Enterprise in diversen Komponenten von Drittanbietern ausnutzen, um einen nicht näher spezifizierten Angriff durchzuführen.
- WID-SEC-W-2023-1424Xerox FreeFlow Print Server für Solaris: Mehrere SchwachstellenDeutsch2023-06-12csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen in Xerox FreeFlow Print Server ausnutzen, um die Vertraulichkeit, Verfügbarkeit und Integrität des Systems zu gefährden.
- WID-SEC-W-2023-1614Tenable Security Nessus Network Monitor: Mehrere SchwachstellenDeutsch2023-06-29csaf · cert_bundDE
Ein entfernter, anonymer, authentisierter oder lokaler Angreifer kann mehrere Schwachstellen in Tenable Security Nessus Network Monitor ausnutzen, um beliebigen Code auszuführen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszulösen und Daten zu manipulieren.
- WID-SEC-W-2023-1728Autodesk AutoCAD: Mehrere SchwachstellenDeutsch2023-07-11csaf · cert_bundDE
Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in Autodesk AutoCAD ausnutzen, um einen Denial of Service Zustand herbeizuführen, Sicherheitsvorkehrungen zu umgehen, Dateien zu manipulieren oder Informationen offenzulegen.
- WID-SEC-W-2023-2031Xerox FreeFlow Print Server: Mehrere SchwachstellenDeutsch2023-08-09csaf · cert_bundDE
Ein Angreifer kann mehrere Schwachstellen in Xerox FreeFlow Print Server ausnutzen, um die Vertraulichkeit, Verfügbarkeit und Integrität des Systems zu gefährden.
- WID-SEC-W-2023-2229Splunk Splunk Enterprise: Mehrere SchwachstellenDeutsch2023-08-30csaf · cert_bundDE
Ein entfernter, authentifizierter Angreifer kann mehrere Schwachstellen in Splunk Splunk Enterprise ausnutzen, um beliebigen Code auszuführen, einen 'Denial of Service'-Zustand zu verursachen, seine Privilegien zu erweitern und weitere, nicht spezifizierte Auswirkungen zu verursachen.
- WID-SEC-W-2024-3377Dell PowerProtect Data Domain: Mehrere SchwachstellenDeutsch2024-11-07csaf · cert_bundDE
Ein lokaler Angreifer kann mehrere Schwachstellen in Dell PowerProtect Data Domain ausnutzen, um seine Privilegien zu erhöhen, Informationen offenzulegen und um nicht näher beschriebene Auswirkungen zu erzielen.
- ICSA-23-131-05Siemens SINEC NMS Third-Party2023-05-09icsa · cisa_csaf_otUS
Multiple vulnerabilities affecting third-party components libexpat and libcurl of SINEC NMS before V1.0.3.1 could allow an attacker to impact SINEC NMS confidentiality, integrity and availability. Siemens has released an update for SINEC NMS and recommends to update to the latest version.
- ICSA-23-348-10Siemens SIMATIC S7-15002023-12-12icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
- CURL-CVE-2022-42916HSTS bypass via IDN2022-10-26vendor · osvUS
curl's HSTS check could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This mechanism could be bypassed if the hostname in the given URL uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (`IDEOGRAPHIC FULL STOP`) instead of the common ASCII full stop (U+002E) `.`. Like this: `http://curl。se。`
also known as (4)
Other names and identifiers for this entity.
sources
Which sources assert this record, and when.
references (46)
External citations — patches, advisories, analysis.
- http://seclists.org/fulldisclosure/2023/Jan/19cnnvd
- http://seclists.org/fulldisclosure/2023/Jan/20cnnvd
- http://www.openwall.com/lists/oss-security/2022/12/21/1cnnvd
- https://access.redhat.com/security/cve/cve-2022-42916cnnvd
- https://curl.se/docs/CVE-2022-42916.htmlcnnvd
- https://cxsecurity.com/cveshow/CVE-2022-42916/cnnvd
- https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/37YEVVC6NAF6H7UHH6YAUY5QEVY6LIH2/cnnvd
- https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/HVU3IMZCKR4VE6KJ4GCWRL2ILLC6OV76/cnnvd
Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.
Free scan