CVE-2022-1343

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).

Multiple third-party component vulnerabilities were reported for the Busybox applet, the Linux Kernel, OpenSSL, OpenVPN and various other components used by the RUGGEDCOM and SCALANCE products. The vulnerabilities range from improper neutralization of special elements to improper handling of commands under certain circumstances, that could lead to code injection and denial of service. Siemens has released updates for the affected products and recommends to update to the latest versions.

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. SIMATIC S7-1500 TM MFP V1.0 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. This advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (https://cert-portal.siemens.com/productcert/html/ssa-265688.html).

SINAMICS PERFECT HARMONY GH180 is affected by multiple vulnerabilities in the integrated SCALANCE S615 device, as documented in SSA-419740 ( https://cert-portal.siemens.com/productcert/html/ssa-419740.html). Siemens recommends to update the firmware of the integrated SCALANCE S615 device to the latest version. Siemens recommends specific countermeasures for products where the firmware update is not, or not yet applied. Additional considerations regarding the specific impact of the vulnerabilities to SINAMICS MV products can be found in the chapter "Additional Information".

Siemens has released a new version for Brownfield Connectivity - Client that contains fixes for multiple vulnerabilities in the underlying OpenSSL library. Successful exploitation of these vulnerabilities could lead to Denial of Service (DoS). Siemens has released an update for Brownfield Connectivity - Client and recommends to update to the latest version.

Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in OpenSSL ausnutzen, um beliebigen Programmcode mit den Rechten des Dienstes auszuführen, Sicherheitsvorkehrungen zu umgehen, Dateien zu manipulieren oder einen Denial of Service Zustand herbeizuführen.

Ein Angreifer aus dem angrenzenden Netzwerk oder ein entfernter, anonymer, authentisierter, physischer oder lokaler Angreifer kann mehrere Schwachstellen in Siemens SIMATIC S7 ausnutzen, um beliebigen Code auszuführen, Sicherheitsmaßnahmen zu umgehen, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand herbeizuführen, seine Privilegien zu erweitern und Daten zu manipulieren.

The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).

Siemens has released a new version for Brownfield Connectivity - Client that contains fixes for multiple vulnerabilities in the underlying OpenSSL library. Successful exploitation of these vulnerabilities could lead to Denial of Service (DoS). Siemens has released an update for Brownfield Connectivity - Client and recommends to update to the latest version.

Multiple third-party component vulnerabilities were reported for the Busybox applet, the Linux Kernel, OpenSSL, OpenVPN and various other components used by the RUGGEDCOM and SCALANCE products. The vulnerabilities range from improper neutralization of special elements to improper handling of commands under certain circumstances, that could lead to code injection and denial of service. Siemens has released updates for the affected products and recommends to update to the latest versions.

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. This advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 ( https://cert-portal.siemens.com/productcert/html/ssa-265688.html).

SINAMICS PERFECT HARMONY GH180 is affected by multiple vulnerabilities in the integrated SCALANCE S615 device, as documented in SSA-419740 ( https://cert-portal.siemens.com/productcert/html/ssa-419740.html). Siemens recommends to update the firmware of the integrated SCALANCE S615 device to the latest version. Siemens recommends specific countermeasures for products where the firmware update is not, or not yet applied. Additional considerations regarding the specific impact of the vulnerabilities to SINAMICS MV products can be found in the chapter "Additional Information".

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).

The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0.