CVE-2010-3865

highpriority · track · 29EPSS 0.006 · 46 %ileEUUS

grimoire priorityP2 · Scheduled

Exploitable?

—

no known exploitation

Likely / severe?

0.56% (46th) EPSS

CVSS 7.2 · high

Is it mine?

186 products

Check your exposure

Who says so?

3 sources

enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-23

Integer overflow in the rds_rdma_pages function in net/rds/rdma.c in the Linux kernel allows local users to cause a denial of service (crash) and possibly execute arbitrary code via a crafted iovec struct in a Reliable Datagram Sockets (RDS) request, which triggers a buffer overflow.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixedkernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-PAE-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debug-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-debuginfo-common-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-doc-0:2.6.18-194.32.1.el5.noarch as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-doc-0:2.6.18-194.32.1.el5.noarch as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-headers-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-kdump-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-xen-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0004
Fixedkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-bootwrapper-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-ppc64-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-s390x-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-kdump-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-kdump-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedkernel-kdump-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Fixedperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
Users should upgrade to these updated packages, which contain backported patches to correct these issues. Documentation for the bugs fixed by this update will be available shortly from the Technical Notes document, linked to in the References section. The system must be rebooted for this update to take effect. Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at http://kbase.redhat.com/faq/docs/DOC-11259 To install kernel packages manually, use "rpm -ivh [package]". Do not use "rpm -Uvh" as that will remove the running kernel binaries from your system. You may use "rpm -e" to remove old kernels after determining that the new kernel functions properly on your system.
https://access.redhat.com/errata/RHSA-2011:0007
Workaroundkernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-PAE-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.18-194.32.1.el5.noarch as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.18-194.32.1.el5.noarch as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.i386 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.i386 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.ppc as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-debuginfo-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-debuginfo-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-devel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-devel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-debuginfo-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-devel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-devel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-xen-devel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.src as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-bootwrapper-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debug-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-i686-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-ppc64-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-s390x-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-debuginfo-common-x86_64-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-devel-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-doc-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-firmware-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-headers-0:2.6.32-71.14.1.el6.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-debuginfo-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundkernel-kdump-devel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Desktop (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux HPC Node (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Server (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound
Workaroundperf-0:2.6.32-71.14.1.el6.noarch as a component of Red Hat Enterprise Linux Workstation (v. 6)redhat_csaf
For users that do not run applications that use RDS, you can prevent the rds module from being loaded by adding the following entry to the end of the /etc/modprobe.d/blacklist file: blacklist rds This way, the rds module cannot be loaded accidentally, which may occur if an application that requires RDS is started. A reboot is not necessary for this change to take effect but do make sure the module is not loaded in the first place. You can verify that by running: lsmod | grep rds You may also consider removing the CAP_SYS_MODULE capability from the current global capability set to prevent kernel modules from being loaded or unloaded. The CAP_SYS_MODULE has a capability number of 16 (see linux/capability.h). The default value has all the bits set. To remove this capability, you have to clear the 16th bit of the default 32-bit value, e.g. 0xffffff ^ (1 << 16): echo 0xFFFEFFFF > /proc/sys/kernel/cap-bound

cvss

Technical severity, 0–10. One row per scoring source.

7.2

010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–high · 6.1–7.2

v2.07.2highAV:L/AC:L/Au:N/C:C/I:C/A:Cprimary · NVD / NIST USexploitability 3.9 · impact 10

v2.06.1mediumAV:L/AC:L/Au:N/C:C/I:C/A:C/E:Usecondary · CVSS-BT (t0sche)

v2.07.2highAV:L/AC:L/Au:N/C:C/I:C/A:Csecondary · Red Hat Product Security US

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-190USprimaryCWE-190US

affected products (186)

Products and version ranges known to be affected.

n/a n/a≤ n/aenisa_euvdEU
linux linux kernel≤ 2.6.36nvdUScpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
opensuse opensuse= 11.2nvdUScpe:2.3:o:opensuse:opensuse:*:*:*:*:*:*:*:*
opensuse opensuse= 11.3nvdUScpe:2.3:o:opensuse:opensuse:*:*:*:*:*:*:*:*
suse linux enterprise high availability extension= 11nvdUScpe:2.3:o:suse:linux_enterprise_high_availability_extension:*:*:*:*:*:*:*:*
suse linux enterprise real time= 11nvdUScpe:2.3:o:suse:linux_enterprise_real_time:*:*:*:*:*:*:*:*
kernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.i686 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.ia64 as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.ppc64 as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.s390x as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.src as a component of Red Hat Enterprise Linux Desktop (v. 5 client)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux (v. 5 server)all versionsfixedredhat_csafUS
kernel-0:2.6.18-194.32.1.el5.x86_64 as a component of Red Hat Enterprise Linux Desktop (v. 5 client)all versionsfixedredhat_csafUS
kernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Desktop (v. 6)all versionsfixedredhat_csafUS
kernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Server (v. 6)all versionsfixedredhat_csafUS
kernel-0:2.6.32-71.14.1.el6.i686 as a component of Red Hat Enterprise Linux Workstation (v. 6)all versionsfixedredhat_csafUS
kernel-0:2.6.32-71.14.1.el6.ppc64 as a component of Red Hat Enterprise Linux Server (v. 6)all versionsfixedredhat_csafUS
kernel-0:2.6.32-71.14.1.el6.s390x as a component of Red Hat Enterprise Linux Server (v. 6)all versionsfixedredhat_csafUS

showing 20 of 186

advisories (2)

Vendor and ecosystem advisories describing this.

RHSA-2011:0004Red Hat Security Advisory: kernel security, bug fix, and enhancement update2011-01-04csaf · redhat_csafUS
Updated kernel packages that fix multiple security issues, several bugs, and add an enhancement are now available for Red Hat Enterprise Linux 5. The Red Hat Security Response Team has rated this update as having important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
RHSA-2011:0007Red Hat Security Advisory: kernel security and bug fix update2011-01-11csaf · redhat_csafUS
Updated kernel packages that fix multiple security issues and several bugs are now available for Red Hat Enterprise Linux 6. The Red Hat Security Response Team has rated this update as having important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.

also known as (2)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

enisa_euvd nvd redhat_csaf NVD CVE.org MITRE

published 2011-01-11modified 2026-06-16

related (4,626)

Related entries.

ID	severity	EPSS	exploitable	published
CVE-2025-48595US	—OT critical	1.71% (77th)	KEV	2026-06-01
In multiple locations, there is a possible way to achieve code execution due to an integer overflow. This could lead to local escalation of privilege with no additional execution p…
CVE-2026-21385US	—OT critical	1.29% (70th)	KEV	2026-03-02
Memory corruption while using alignments for memory allocation.
CVE-2025-24985US	—OT critical	3.89% (90th)	KEV	2025-03-11
Integer overflow or wraparound in Windows Fast FAT Driver allows an unauthorized attacker to execute code locally.
CVE-2024-38080US	—OT critical	7.12% (94th)	KEV	2024-07-09
Windows Hyper-V Elevation of Privilege Vulnerability
CVE-2023-33107US	high7.8OT critical	0.74% (54th)	KEV	2023-12-05
Memory corruption in Graphics Linux while assigning shared virtual memory region during IOCTL call.

+4621 more

references (44)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan