CVE-2009-0788

mediumpriority · track · 27EPSS 0.017 · 77 %ileEUUS
grimoire priorityP3 · Track
Exploitable?
—
no known exploitation
Likely / severe?
1.71% (77th) EPSS
CVSS 6.4 · medium
Is it mine?
62 products
Check your exposure
Who says so?
4 sources
cnnvd · enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-28

Red Hat Network (RHN) Satellite Server 5.3 and 5.4 does not properly rewrite unspecified URLs, which allows remote attackers to (1) obtain unspecified sensitive host information or (2) use the server as an inadvertent proxy to connect to arbitrary services and IP addresses via unspecified vectors.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • Fixedspacewalk-backend-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-0:0.5.28-59.2.el4sat.src as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-0:0.5.28-59.2.el5sat.src as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-0:1.2.13-37.el5sat.src as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-app-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-app-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-app-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-applet-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-applet-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-applet-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-common-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-common-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-common-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-tool-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-tool-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-config-files-tool-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-export-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-export-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-iss-export-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-libs-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-package-push-server-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-package-push-server-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-package-push-server-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-server-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-server-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-server-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-sql-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-sql-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-sql-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-sql-oracle-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-tools-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-tools-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-tools-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-upload-server-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-upload-server-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-upload-server-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xml-export-libs-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xml-export-libs-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xml-export-libs-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xmlrpc-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xmlrpc-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xmlrpc-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xp-0:0.5.28-59.2.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xp-0:0.5.28-59.2.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-backend-xp-0:1.2.13-37.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:0.5.9-16.el4sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:0.5.9-16.el4sat.src as a component of Red Hat Satellite 5.3 (RHEL v.4)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:0.5.9-16.el5sat.noarch as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:0.5.9-16.el5sat.src as a component of Red Hat Satellite 5.3 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:1.2.2-2.el5sat.noarch as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
  • Fixedspacewalk-config-0:1.2.2-2.el5sat.src as a component of Red Hat Satellite 5.4 (RHEL v.5)redhat_csaf

    Before applying this update, make sure all previously-released errata relevant to your system have been applied. This update is available via the Red Hat Network. Details on how to use the Red Hat Network to apply this update are available at https://access.redhat.com/kb/docs/DOC-11259 The patch for CVE-2009-0788 includes changes to "/etc/httpd/conf.d/zz-spacewalk-www.conf". If you have manually edited this file, this erratum will not overwrite or replace your existing version, but will create a new file containing the fixes, "/etc/httpd/conf.d/zz-spacewalk-www.conf.rpmnew". If this .rpmnew file exists after installing the update, the following steps must be performed to fully fix CVE-2009-0788: 1) Create a backup copy of your "/etc/httpd/conf.d/zz-spacewalk-www.conf" file. 2) Carefully review your manual zz-spacewalk-www.conf changes, and merge those changes into the zz-spacewalk-www.conf.rpmnew file. 3) Once you have merged all your manual changes into zz-spacewalk-www.conf.rpmnew, save this new version as "/etc/httpd/conf.d/zz-spacewalk-www.conf", and then restart the RHN Satellite server ("rhn-satellite restart").

    https://access.redhat.com/errata/RHSA-2011:0434
02

cvss

Technical severity, 0–10. One row per scoring source.

6.4
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · low–medium · 3.3–6.4

v2.06.4mediumAV:N/AC:L/Au:N/C:P/I:P/A:Nprimary · NVD / NIST USexploitability 10 · impact 4.9
v2.05.4mediumAV:N/AC:L/Au:N/C:P/I:P/A:N/E:Usecondary · CVSS-BT (t0sche)
v2.03.3lowAV:A/AC:L/Au:N/C:P/I:N/A:Nsecondary · Red Hat Product Security US
03

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-200USprimary
04

affected products (62)

Products and version ranges known to be affected.

showing 20 of 62
05

advisories (1)

Vendor and ecosystem advisories describing this.

  • RHSA-2011:0434Red Hat Security Advisory: security update for Red Hat Network Satellite2011-04-11csaf · redhat_csafUS

    Updated packages that fix two security issues are now available for Red Hat Network Satellite 5.3 and 5.4. The Red Hat Security Response Team has rated this update as having moderate security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.

06

also known as (3)

Other names and identifiers for this entity.

07

sources

Which sources assert this record, and when.

cnnvdenisa_euvdnvdredhat_csafNVDCVE.orgMITRE
published 2011-04-18modified 2026-06-16
09

references (22)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan