CVE-2005-1993

lowpriority · track · 15EPSS 0.004 · 34 %ileEURUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.40% (34th) EPSS

CVSS 3.7 · low

Is it mine?

98 products

Check your exposure

Who says so?

4 sources

enisa_euvd · fstec_bdu · nvd · redhat_csaf

EPSS · scored 2026-10-28

Race condition in sudo 1.3.1 up to 1.6.8p8, when the ALL pseudo-command is used after a user entry in the sudoers file, allows local users to gain privileges via a symlink attack.

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

Fixedsudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.src as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.src as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.src as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535
Fixedsudo-debuginfo-0:1.6.7p5-30.1.1.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system.
https://access.redhat.com/errata/RHSA-2005:535

cvss

Technical severity, 0–10. One row per scoring source.

3.7

010

base score 0–10 · higher = more severe · hover a vector to decode

v2.03.7lowAV:L/AC:H/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USexploitability 1.9 · impact 6.4

v2.03.7lowAV:L/AC:H/Au:N/C:P/I:P/A:Psecondary · FSTEC (BDU) RU

v2.03.1lowAV:L/AC:H/Au:N/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-362USLLM-inferredCWE-366USLLM-inferred

affected products (98)

Products and version ranges known to be affected.

n/a n/a≤ n/aenisa_euvdEU
Red Hat Inc. Red Hat Enterprise Linux≤ Desktop 4fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ Desktop 3fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ 3fstec_bduRU
Red Hat Inc. Red Hat Enterprise Linux≤ 2.1fstec_bduRU
todd miller sudo= 1.3.1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.7nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.8nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.5.9nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.2nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p1nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p2nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p3nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p4nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p5nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*
todd miller sudo= 1.6.3_p6nvdUScpe:2.3:a:todd_miller:sudo:*:*:*:*:*:*:*:*

showing 20 of 98

advisories (1)

Vendor and ecosystem advisories describing this.

RHSA-2005:535Red Hat Security Advisory: sudo security update2005-06-29csaf · redhat_csafUS
An updated sudo package is available that fixes a race condition in sudo's pathname validation. This update has been rated as having moderate security impact by the Red Hat Security Response Team.

also known as (5)

Other names and identifiers for this entity.

sources

Which sources assert this record, and when.

enisa_euvd fstec_bdu nvd redhat_csaf NVD CVE.org MITRE

published 2005-06-20modified 2026-06-16

references (36)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan