CVE-2005-0337

highpriority · track · 31EPSS 0.028 · 86 %ileEUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
2.81% (86th) EPSS
CVSS 7.5 · high
Is it mine?
56 products
Check your exposure
Who says so?
3 sources
enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-27

Postfix 2.1.3, when /proc/net/if_inet6 is not available and permit_mx_backup is enabled in smtpd_recipient_restrictions, allows remote attackers to bypass e-mail restrictions and perform mail relaying by sending mail to an IPv6 hostname.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • Fixedpostfix-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.src as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.src as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.src as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.src as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-debuginfo-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.i386 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.ia64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.ppc as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.s390 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.s390x as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux AS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux Desktop version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux ES version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
  • Fixedpostfix-pflogsumm-2:2.1.5-4.2.RHEL4.x86_64 as a component of Red Hat Enterprise Linux WS version 4redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2005:152
02

cvss

Technical severity, 0–10. One row per scoring source.

7.5
010

base score 0–10 · higher = more severe · hover a vector to decode⚠ sources disagree · medium–high · 6.4–7.5

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USexploitability 10 · impact 6.4
v2.06.4mediumAV:N/AC:L/Au:N/C:P/I:P/A:P/E:Usecondary · CVSS-BT (t0sche)
03

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-284USLLM-inferredCWE-285USLLM-inferred
04

affected products (56)

Products and version ranges known to be affected.

showing 20 of 56
05

advisories (1)

Vendor and ecosystem advisories describing this.

  • RHSA-2005:152Red Hat Security Advisory: postfix security update2005-03-16csaf · redhat_csafUS

    Updated postfix packages that include a security fix and two other bug fixes are now available for Red Hat Enterprise Linux 4. This update has been rated as having low security impact by the Red Hat Security Response Team

06

also known as (2)

Other names and identifiers for this entity.

07

sources

Which sources assert this record, and when.

enisa_euvdnvdredhat_csafNVDCVE.orgMITRE
published 2005-05-02modified 2026-06-16
08

references (14)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan