CVE-2004-1018
highpriority · attend · 56EPSS 0.162 · 97 %ileexploit · functionalEUUSEPSS · scored 2026-10-27
Multiple integer handling errors in PHP before 4.3.10 allow attackers to bypass safe mode restrictions, cause a denial of service, or execute arbitrary code via (1) a negative offset value to the shmop_write function, (2) an "integer overflow/underflow" in the pack function, or (3) an "integer overflow/underflow" in the unpack function. NOTE: this issue was originally REJECTed by its CNA before publication, but that decision is in active dispute. This candidate may change significantly in the future as a result of further discussion.
remediations
Vendor fix, mitigation, or workaround guidance, as published by each source.
A vendor fix is available.
- Fixedphp-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.src as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.src as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.src as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.src as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-debuginfo-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-devel-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-imap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-ldap-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-mysql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-odbc-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.i386 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.i386 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.ia64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Desktop version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - Fixedphp-pgsql-0:4.3.2-19.ent.x86_64 as a component of Red Hat Enterprise Linux WS version 3redhat_csaf
Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt
https://access.redhat.com/errata/RHSA-2004:687 - FixedRed Hat Enterprise Linux AS (Advanced Server) version 2.1 redhat_csaf
Before applying this update, make sure that all previously-released errata relevant to your system have been applied. Use Red Hat Network to download and update your packages. To launch the Red Hat Update Agent, use the following command: up2date For information on how to install packages manually, refer to the following Web page for the System Administration or Customization guide specific to your system: http://www.redhat.com/docs/manuals/enterprise/
https://access.redhat.com/errata/RHSA-2005:031 - FixedRed Hat Enterprise Linux ES version 2.1redhat_csaf
Before applying this update, make sure that all previously-released errata relevant to your system have been applied. Use Red Hat Network to download and update your packages. To launch the Red Hat Update Agent, use the following command: up2date For information on how to install packages manually, refer to the following Web page for the System Administration or Customization guide specific to your system: http://www.redhat.com/docs/manuals/enterprise/
https://access.redhat.com/errata/RHSA-2005:031 - FixedRed Hat Enterprise Linux WS version 2.1redhat_csaf
Before applying this update, make sure that all previously-released errata relevant to your system have been applied. Use Red Hat Network to download and update your packages. To launch the Red Hat Update Agent, use the following command: up2date For information on how to install packages manually, refer to the following Web page for the System Administration or Customization guide specific to your system: http://www.redhat.com/docs/manuals/enterprise/
https://access.redhat.com/errata/RHSA-2005:031 - FixedRed Hat Linux Advanced Workstation 2.1redhat_csaf
Before applying this update, make sure that all previously-released errata relevant to your system have been applied. Use Red Hat Network to download and update your packages. To launch the Red Hat Update Agent, use the following command: up2date For information on how to install packages manually, refer to the following Web page for the System Administration or Customization guide specific to your system: http://www.redhat.com/docs/manuals/enterprise/
https://access.redhat.com/errata/RHSA-2005:031 - FixedRed Hat Stronghold 4redhat_csaf
Updated Stronghold 4 packages containing backported patches to correct these issues are now available via the update agent service. Run the following command from the Stronghold 4 install root to upgrade an existing Stronghold 4 installation to the new package versions: $ bin/agent The Stronghold 4.0k patch release which contains these updated packages is also available from the download site. After upgrading Stronghold, the server must be completely restarted by running the following commands from the install root: $ bin/stop-server $ bin/start-server For more information on how to upgrade between releases of Stronghold 4, refer to http://stronghold.redhat.com/support/upgrade-sh4
https://access.redhat.com/errata/RHSA-2005:882
cvss
Technical severity, 0–10. One row per scoring source.
base score 0–10 · higher = more severe · hover a vector to decode
weaknesses
The CWE weakness classes this flaw belongs to.
exploits (2)
Public proof-of-concept and weaponised exploit code.
- EDB-24854PHP 3/4/5 - Multiple Local/Remote Vulnerabilities (1)functional · exploit_db
- EDB-24855PHP 3/4/5 - Multiple Local/Remote Vulnerabilities (2)functional · exploit_db
affected products (124)
Products and version ranges known to be affected.
- Red Hat Enterprise Linux AS (Advanced Server) version 2.1 all versionsfixedredhat_csafUScpe:/o:redhat:enterprise_linux:2.1::as
- Red Hat Enterprise Linux ES version 2.1all versionsfixedredhat_csafUScpe:/o:redhat:enterprise_linux:2.1::es
- Red Hat Enterprise Linux WS version 2.1all versionsfixedredhat_csafUScpe:/o:redhat:enterprise_linux:2.1::ws
- Red Hat Linux Advanced Workstation 2.1all versionsfixedredhat_csafUScpe:/o:redhat:enterprise_linux:2.1::aw
advisories (3)
Vendor and ecosystem advisories describing this.
- RHSA-2004:687Red Hat Security Advisory: php security update2004-12-21csaf · redhat_csafUS
Updated php packages that fix various security issues and bugs are now available for Red Hat Enterprise Linux 3.
- RHSA-2005:031Red Hat Security Advisory: php security update2005-01-19csaf · redhat_csafUS
Updated php packages that fix various security issues are now available for Red Hat Enterprise Linux 2.1.
- RHSA-2005:882Red Hat Security Advisory: openssl, php, mod_ssl, mod_imap security update for Stronghold2005-12-19csaf · redhat_csafUS
Updated versions of cross-platform Stronghold that fix security issues in mod_ssl, mod_imap, OpenSSL, and PHP are now available. This update has been rated as having important security impact by the Red Hat Security Response Team.
also known as (2)
Other names and identifiers for this entity.
sources
Which sources assert this record, and when.
references (30)
External citations — patches, advisories, analysis.
- http://marc.info/?l=bugtraq&m=110314318531298&w=2enisa_euvd
- http://www.hardened-php.net/advisories/012004.txtenisa_euvd
- http://www.mandriva.com/security/advisories?name=MDKSA-2004:151enisa_euvd
- http://www.mandriva.com/security/advisories?name=MDKSA-2005:072enisa_euvd
- http://www.osvdb.org/12411enisa_euvd
- http://www.php.net/release_4_3_10.phpenisa_euvd
- http://www.redhat.com/support/errata/RHSA-2005-032.htmlenisa_euvd
- http://www.redhat.com/support/errata/RHSA-2005-816.htmlenisa_euvd
Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.
Free scan