CVE-2003-0858

lowpriority · track · 8EPSS 0.004 · 30 %ileEUUS
grimoire priorityP3 · Track
Exploitable?
—
no known exploitation
Likely / severe?
0.36% (30th) EPSS
CVSS 2.1 · low
Is it mine?
23 products
Check your exposure
Who says so?
3 sources
enisa_euvd · nvd · redhat_csaf

EPSS · scored 2026-10-27

Zebra 0.93b and earlier, and quagga before 0.95, allows local users to cause a denial of service by sending spoofed messages as other users to the kernel netlink interface.

01

remediations

Vendor fix, mitigation, or workaround guidance, as published by each source.

A vendor fix is available.

  • FixedRed Hat Enterprise Linux AS (Advanced Server) version 2.1 redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:305
  • FixedRed Hat Linux Advanced Workstation 2.1redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:305
  • FixedRed Hat Linux 7.2redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:307
  • FixedRed Hat Linux 7.3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:307
  • FixedRed Hat Linux 8.0redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:307
  • FixedRed Hat Linux 9redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:307
  • Fixedquagga-0:0.96.2-8.3E.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.src as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.src as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-0:0.96.2-8.3E.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.i386 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.i386 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.ia64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.ia64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.ppc as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.s390 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.s390x as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.x86_64 as a component of Red Hat Enterprise Linux AS version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
  • Fixedquagga-debuginfo-0:0.96.2-8.3E.x86_64 as a component of Red Hat Enterprise Linux ES version 3redhat_csaf

    Before applying this update, make sure all previously released errata relevant to your system have been applied. To update all RPMs for your particular architecture, run: rpm -Fvh [filenames] where [filenames] is a list of the RPMs you wish to upgrade. Only those RPMs which are currently installed will be updated. Those RPMs which are not installed but included in the list will not be updated. Note that you can also use wildcards (*.rpm) if your current directory *only* contains the desired RPMs. Please note that this update is also available via Red Hat Network. Many people find this an easier way to apply updates. To use Red Hat Network, launch the Red Hat Update Agent with the following command: up2date This will start an interactive process that will result in the appropriate RPMs being upgraded on your system. If up2date fails to connect to Red Hat Network due to SSL Certificate Errors, you need to install a version of the up2date client with an updated certificate. The latest version of up2date is available from the Red Hat FTP site and may also be downloaded directly from the RHN website: https://rhn.redhat.com/help/latest-up2date.pxt

    https://access.redhat.com/errata/RHSA-2003:315
02

cvss

Technical severity, 0–10. One row per scoring source.

2.1
010

base score 0–10 · higher = more severe · hover a vector to decode

v2.02.1lowAV:L/AC:L/Au:N/C:N/I:N/A:Pprimary · NVD / NIST USexploitability 3.9 · impact 2.9
v2.01.8lowAV:L/AC:L/Au:N/C:N/I:N/A:P/E:Usecondary · CVSS-BT (t0sche)
03

weaknesses

The CWE weakness classes this flaw belongs to.

CWE-399USprimary
04

affected products (23)

Products and version ranges known to be affected.

showing 20 of 23
05

advisories (3)

Vendor and ecosystem advisories describing this.

  • RHSA-2003:305Red Hat Security Advisory: zebra security update2003-11-12csaf · redhat_csafUS

    Updated zebra packages that close a locally-exploitable and a remotely-exploitable denial of service vulnerability are now available.

  • RHSA-2003:307Red Hat Security Advisory: : Updated zebra packages fix security vulnerabilities2003-11-13csaf · redhat_csafUS

    Updated zebra packages that close a locally-exploitable and a remotely-exploitable denial of service vulnerability are now available.

  • RHSA-2003:315Red Hat Security Advisory: quagga security update2003-11-12csaf · redhat_csafUS

    Updated Quagga packages that close a locally-exploitable denial of service vulnerability are now available.

06

also known as (2)

Other names and identifiers for this entity.

07

sources

Which sources assert this record, and when.

enisa_euvdnvdredhat_csafNVDCVE.orgMITRE
published 2003-12-15modified 2026-06-16
09

references (12)

External citations — patches, advisories, analysis.

scry

Attackers weaponise vulnerabilities like this against internet-exposed services. See what is exposed on your perimeter with a free passive scan.

Free scan