CVE-2026-43038

criticalPriorität · verfolgen · 0EPSS 0.003 · 16. PerzentilDEEUFRNLRUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
0.26% (16th) EPSS
CVSS 9.8 · critical
Is it mine?
107 products
Prüfe deine Angriffsfläche
Who says so?
8 sources
cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · bewertet 2026-10-22

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway.

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Noch kein Hersteller-Fix; eine Mitigation ist verfügbar.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot

    Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt

    Currently no fix is available

  • Kein Fix verfügbarSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot

    Currently no fix is available

  • Kein Fix verfügbarSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot

    Currently no fix is available

  • Kein Fix verfügbarSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot

    Currently no fix is available

02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

9.8
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · high–critical · 7.3–9.8

v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · CISA US
v3.19.8criticalAV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · FSTEC (BDU) RU
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · ENISA EU
v3.17.3highCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:HsecondaryAusnutzbarkeit 1.8 · Auswirkung 5.5
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HsecondaryAusnutzbarkeit 3.9 · Auswirkung 5.9
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · Siemens ProductCERT DE
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · NCSC-NL NL
03

SSVC

Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.

Exploitation: none · Automatable: yes · Technical Impact: totalcoordinatorcisa_ssvcUS
04

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-787USCWE-843USCWE-843USCWE-843USCWE-843USCWE-843US
05

betroffene Produkte (107)

Betroffene Produkte und Versionsbereiche.

20 von 107 angezeigt
06

Advisories (9)

Hersteller- und Ökosystem-Meldungen dazu.

  • NCSC-2026-0431Kwetsbaarheden verholpen in IBM DataPower Gateway en onderliggende componentenNL2026-10-16csaf · ncsc_nlNL

    IBM heeft meerdere beveiligingsproblemen opgelost in DataPower Gateway versies 10.5 tot 11.0 en een veelvoud aan onderliggende subcomponenten.

  • SSA-019113SSA-019113: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.62026-07-14csaf · siemens_psirtDE

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.6 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.6 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1.6 only; for version V3.1.7 refer to SSA-457936.

  • SSA-082556SSA-082556: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.52025-06-10csaf · siemens_psirtDE

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.5 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1.5 only; for version V3.1.6 refer to SSA-019113.

  • SSA-457936SSA-457936: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.72026-10-13csaf · siemens_psirtDE

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.7 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

  • WID-SEC-W-2026-1346Linux Kernel: Mehrere SchwachstellenDeutsch2026-05-03csaf · cert_bundDE

    Ein entfernter Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um Root-Rechte zu erlangen, um Sicherheitsmechanismen zu umgehen, einen Denial-of-Service-Zustand herbeizuführen oder Auswirkungen unbestimmter Art zu erzielen.

  • WID-SEC-W-2026-3623IBM DataPower Gateway: Mehrere SchwachstellenDeutsch2026-09-28csaf · cert_bundDE

    Ein Angreifer kann mehrere Schwachstellen in IBM DataPower Gateway ausnutzen, um beliebigen Programmcode auszuführen, erweiterte Berechtigungen zu erlangen, Sicherheitsmaßnahmen zu umgehen, Daten zu manipulieren oder offenzulegen, einen Denial-of-Service-Zustand auszulösen oder Cross-Site-Scripting-Angriffe durchzuführen.

  • ICSA-26-209-04Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP2026-07-14icsa · cisa_csaf_otUS

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.6 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

  • ICSA-26-295-11Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP2026-10-13icsa · cisa_csaf_otUS

    Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.7 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

  • CERTFR-2026-AVI-1298Multiples vulnérabilités dans les produits SiemensFrançais2026-10-13vendor · certfrFR
07

auch bekannt als (4)

Weitere Namen und Kennungen dieser Entität.

08

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvdenisa_euvdfstec_bducert_bundncsc_nlsiemens_psirtcisa_csaf_otcertfrNVDCVE.orgMITRE
veröffentlicht 2026-05-01geändert 2026-10-19
09

Referenzen (43)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan