CVE-2026-20283
mediumPriorität · verfolgen · 26EPSS 0.006 · 50. PerzentilNLUSEPSS · bewertet 2026-10-27
A vulnerability in the IPsec Open API endpoint of Cisco ISE could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system. This vulnerability is due to insufficient validation of user-supplied input in IPsec Open API calls. An attacker could exploit this vulnerability by sending crafted input to the IPsec Open API endpoint on an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials and the node must have more than one network interface, one of which must be configured as an active IPsec tunnel. Note: For CVE-2026-20283, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- Behoben3.3 Patch 1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 10cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 11cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 7cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 8cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3 Patch 9cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.3.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 4cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 5cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4 Patch 6cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.4.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5 Patch 1cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5 Patch 2cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5 Patch 3cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Behoben3.5.0cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - Workaround3.3 Patch 1cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 10cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 11cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 2cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 3cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 4cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 5cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 6cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 7cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 8cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3 Patch 9cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.3.0cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 1cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 2cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 3cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 4cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 5cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4 Patch 6cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.4.0cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5 Patch 1cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5 Patch 2cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5 Patch 3cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- Workaround3.5.0cisco_csaf
CVE-2026-20282 and CVE-2026-20284: There are no workarounds that address these vulnerabilities. CVE-2026-20283: There is a workaround that addresses this vulnerability. The vulnerability is present only when an IPsec VTI tunnel is created using the API. However, using the Cisco ISE web interface to create an IPsec VTI tunnel does not allow the vulnerability to be configured. If a vulnerable configuration is present, do the following: Return to Administration > System > Settings > Protocols > IPsec > Native IPsec. Choose the tunnel with the vulnerable configuration and remove it. Add the tunnel back using the web interface. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen
SSVC
Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
betroffene Produkte (26)
Betroffene Produkte und Versionsbereiche.
Advisories (2)
Hersteller- und Ökosystem-Meldungen dazu.
- NCSC-2026-0382Kwetsbaarheden verholpen in Cisco Identity Services Engine (ISE)NL2026-09-17csaf · ncsc_nlNL
Cisco heeft 21 kwetsbaarheden verholpen in Cisco Identity Services Engine (ISE) en Cisco ISE Passive Identity Connector (ISE-PIC).
- cisco-sa-ise-mult-vul-ymSsTLCcCisco Identity Services Engine Authenticated Remote Code Execution and API Vulnerabilities2026-09-16csaf · cisco_csafUS
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct SQL injections, modify data, or execute arbitrary commands on the underlying operating system on an affected device. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. Note: For CVE-2026-20282 and CVE-2026-20283, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the scores indicate. The reason is that it is easy to get to root from the achieved privilege level. Cisco has released software updates that address these vulnerabilities. There are workarounds that address one of these vulnerabilities. This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-notice-jfxK98ZP"]. In addition, for further documentation of improvements and fixes in Cisco Identity Services Engine, see Cisco Identity Services Engine Security Hardening Release: September 2026 ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-hardening-ise-XU5EwX5T"].
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (1) nvd
Externe Belege — Patches, Meldungen, Analysen.
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan