CVE-2024-44965

mediumPriorität · verfolgen · 22EPSS 0.002 · 13. PerzentilDEEURUUS

grimoire priorityP3 · Track

Exploitable?

—

no known exploitation

Likely / severe?

0.22% (13th) EPSS

CVSS 5.5 · medium

Is it mine?

81 products

Prüfe deine Angriffsfläche

Who says so?

6 sources

cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · bewertet 2026-10-27

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

BehobenSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)siemens_psirt
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
BehobenSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Update to V3.1.5 or later version
https://support.industry.siemens.com/cs/ww/en/view/109478459/
MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)cisa_csaf_ot
Only build and run applications from trusted sources.
MitigationSIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)cisa_csaf_ot
Only build and run applications from trusted sources.

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

5.5

010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hprimary · NVD / NIST USAusnutzbarkeit 1.8 · Auswirkung 3.6

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · CISA US

v3.15.5mediumAV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · FSTEC (BDU) RU

v3.15.5mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:Hsecondary · Siemens ProductCERT DE

v3.15.1mediumCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:Usecondary · CVSS-BT (t0sche)

SSVC

Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.

Trackcoordinatorcisa_ssvcUS

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-119USCWE-229USCWE-229US

betroffene Produkte (81)

Betroffene Produkte und Versionsbereiche.

Amazon Linux 2alle Versionencert_bundDEcpe:/o:amazon:linux_2:-
Broadcom Brocade SANnavalle Versionencert_bundDEcpe:/a:broadcom:brocade_sannav:-
Debian Linuxalle Versionencert_bundDEcpe:/o:debian:debian_linux:-
Dell Avamaralle Versionencert_bundDEcpe:/a:dell:avamar:-
Dell NetWorker Virtual Editionalle Versionencert_bundDEcpe:/a:dell:networker:virtual_edition
IBM InfoSphere Guardiumalle Versionencert_bundDEcpe:/a:ibm:infosphere_guardium:-
IBM Security Guardium 12.0alle Versionencert_bundDEcpe:/a:ibm:security_guardium:12.0
Open Source Linux Kernelalle Versionencert_bundDEcpe:/o:linux:linux_kernel:-
Oracle Linuxalle Versionencert_bundDEcpe:/o:oracle:linux:-
Oracle VM 3alle Versionencert_bundDEcpe:/a:oracle:vm:3
RESF Rocky Linuxalle Versionencert_bundDEcpe:/o:resf:rocky_linux:-
Red Hat Enterprise Linuxalle Versionencert_bundDEcpe:/o:redhat:enterprise_linux:-
SUSE Linuxalle Versionencert_bundDEcpe:/o:suse:suse_linux:-
Ubuntu Linuxalle Versionencert_bundDEcpe:/o:canonical:ubuntu_linux:-
IBM QRadar SIEM< 7.5.0 UP11cert_bundDE
RUGGEDCOM RST2428P (6GK6242-6PA00)alle Versionennot affectedcisa_csaf_otUS
SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 familyalle Versionennot affectedcisa_csaf_otUS
SCALANCE XCM-/XRM-/XCH-/XRH-300 familyalle Versionennot affectedcisa_csaf_otUS
Siemens RUGGEDCOM RST2428P (6GK6242-6PA00)≤ vers:all/*not affectedcisa_csaf_otUS
Siemens SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family≤ vers:all/*not affectedcisa_csaf_otUS

20 von 81 angezeigt

Advisories (5)

Hersteller- und Ökosystem-Meldungen dazu.

SSA-355557SSA-355557: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.22025-08-12csaf · siemens_psirtDE
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
SSA-398330SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.52023-12-12csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
WID-SEC-W-2024-2057Linux Kernel: Mehrere Schwachstellen ermöglichen Denial of Service oder unspezifischer AngriffDeutsch2024-09-04csaf · cert_bundDE
Ein lokaler Angreifer kann mehrere Schwachstellen in Linux Kernel ausnutzen, um einen Denial of Service Angriff durchzuführen oder weitere unspezifische Angriffe durchzuführen.
ICSA-23-348-10Siemens SIMATIC S7-15002023-12-12icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 ( https://cert-portal.siemens.com/productcert/html/ssb-439005.html).
ICSA-25-226-07Siemens Third-Party Components in SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.

auch bekannt als (4)

Weitere Namen und Kennungen dieser Entität.

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvd enisa_euvd fstec_bdu cert_bund cisa_csaf_ot siemens_psirt NVD CVE.org MITRE

veröffentlicht 2024-09-04geändert 2026-10-15

Referenzen (30)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan