CVE-2024-43882
highPriorität · verfolgen · 28EPSS 0.002 · 15. PerzentilDEEURUUSEPSS · bewertet 2026-10-27
In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- BehobenSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Update to V1.1.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109827684/ - BehobenRUGGEDCOM RST2428P (6GK6242-6PA00)siemens_psirt
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - BehobenSCALANCE XCM-/XRM-/XCH-/XRH-300 familysiemens_psirt
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - BehobenRUGGEDCOM RST2428P (6GK6242-6PA00)cisa_csaf_ot
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - BehobenSCALANCE XCM-/XRM-/XCH-/XRH-300 familycisa_csaf_ot
Update to V3.1 or later version
https://support.industry.siemens.com/cs/ww/en/view/109977557/ - MitigationSIMATIC S7-1500 TM MFP - GNU/Linux subsystemsiemens_psirt
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
- MitigationSIMATIC S7-1500 TM MFP - GNU/Linux subsystemcisa_csaf_ot
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
- Kein Fix verfügbarSIMATIC S7-1500 TM MFP - GNU/Linux subsystemcisa_csaf_ot
Currently no fix is available
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 6.4–8.4
SSVC
Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
betroffene Produkte (73)
Betroffene Produkte und Versionsbereiche.
- Dell PowerProtect Data Domain Management Centeralle Versionencert_bundDEcpe:/a:dell:powerprotect_data_domain_management_center:-
Advisories (7)
Hersteller- und Ökosystem-Meldungen dazu.
- SSA-265688SSA-265688: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.12024-04-09csaf · siemens_psirtDE
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 TM MFP V1.1 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V1.1 only; for version V1.1.1 refer to SSA-784472.
- SSA-355557SSA-355557: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.22025-08-12csaf · siemens_psirtDE
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- SSA-613116SSA-613116: Multiple Vulnerabilities in Third-Party Components in SINEC OS before V3.12025-08-12csaf · siemens_psirtDE
SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- WID-SEC-W-2024-1888Linux Kernel: Mehrere SchwachstellenDeutsch2024-08-20csaf · cert_bundDE
Ein lokaler Angreifer kann mehrere Schwachstellen im Linux-Kernel ausnutzen, um einen Denial-of-Service-Zustand zu erzeugen oder einen unspezifischen Angriff durchzuführen.
- ICSA-24-102-01Siemens SIMATIC S7-1500 TM MFP2024-04-09icsa · cisa_csaf_otUS
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
- ICSA-25-226-07Siemens Third-Party Components in SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.2 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
- ICSA-25-226-15Siemens SINEC OS2025-08-12icsa · cisa_csaf_otUS
SINEC OS before V3.1 contains third-party components with multiple vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
auch bekannt als (4)
Weitere Namen und Kennungen dieser Entität.
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (32)
Externe Belege — Patches, Meldungen, Analysen.
- https://access.redhat.com/security/cve/cve-2024-43882cnnvd
- https://cxsecurity.com/cveshow/CVE-2024-43882/cnnvd
- https://git.kernel.org/stable/c/15469d46ba34559bfe7e3de6659115778c624759cnnvd
- https://git.kernel.org/stable/c/368f6985d46657b8b466a421dddcacd4051f7adacnnvd
- https://git.kernel.org/stable/c/90dfbba89ad4f0d9c9744ecbb1adac4aa2ff4f3ecnnvd
- https://git.kernel.org/stable/c/9b424c5d4130d56312e2a3be17efb0928fec4d64cnnvd
- https://git.kernel.org/stable/c/d2a2a4714d80d09b0f8eb6438ab4224690b7121ecnnvd
- https://git.kernel.org/stable/c/d5c3c7e26275a2d83b894d30f7582a42853a958fcnnvd
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan