CVE-2024-20329
criticalPriorität · verfolgen · 0EPSS 0.012 · 67. PerzentilDEEUNLRUUSEPSS · bewertet 2026-10-27
A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.10 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.11 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.13 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.15 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.20 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.30 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.33 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.17.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.1.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.7 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.2.8 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.39 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.46 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.53 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.55 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.18.3.56 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.12 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.18 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.5 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco 3000 Series Industrial Security Appliances (ISA)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Adaptive Security Virtual Appliance (ASAv)cisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 1000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 2100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 4100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Firepower 9000 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Adaptive Security Appliance (ASA) Software 9.19.1.9 when installed on Cisco Secure Firewall 3100 Seriescisco_csaf
There is a workaround that addresses this vulnerability. Enable the native SSH stack by disabling the CiscoSSH stack. Use the no ssh stack ciscossh command, as shown in the following example: ciscoasa# conf t ciscoasa(config)# no ssh stack ciscossh Connection to 192.168.1.1 closed by remote host. Connection to 192.168.1.1 closed. Note: Active login sessions over SSH will be disconnected when the command is executed. For this change to become persistent across reboots, log in again and save the configuration. While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen
SSVC
Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
betroffene Produkte (270)
Betroffene Produkte und Versionsbereiche.
- Cisco ASA (Adaptive Security Appliance)alle Versionencert_bundDEcpe:/h:cisco:adaptive_security_appliance:-
Advisories (3)
Hersteller- und Ökosystem-Meldungen dazu.
- NCSC-2024-0424Kwetsbaarheden verholpen in Cisco Adaptive Security Appliance en Firepower Threat DefenseNL2024-10-24csaf · ncsc_nlNL
Cisco heeft kwetsbaarheden verholpen in Adaptive Security Appliance (ASA) en Firepower Threat Defense (FTD).
- WID-SEC-W-2024-3261Cisco ASA (Adaptive Security Appliance): Mehrere SchwachstellenDeutsch2024-10-23csaf · cert_bundDE
Ein entfernter, authentisierter oder anonymer Angreifer kann mehrere Schwachstellen in Cisco ASA (Adaptive Security Appliance) ausnutzen, um beliebigen Programmcode mit Administratorrechten auszuführen und einen Denial-of-Service-Zustand zu erzeugen.
- cisco-sa-asa-ssh-rce-gRAuPEUFCisco Adaptive Security Appliance Software SSH Remote Command Injection Vulnerability2024-10-23csaf · cisco_csafUS
A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].
auch bekannt als (4)
Weitere Namen und Kennungen dieser Entität.
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (10)
Externe Belege — Patches, Meldungen, Analysen.
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ssh-rce-gRAuPEUFcnnvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmc-xss-M446vbEOcnnvd
- https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300cnnvd
- https://vigilance.fr/vulnerability/Cisco-ASA-multiple-vulnerabilities-dated-23-10-2024-45458cnnvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ssh-rce-gRAuPEUFenisa_euvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmc-xss-M446vbEOenisa_euvd
- https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300enisa_euvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ssh-rce-gRAuPEUFVendor Advisorynvd
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan