CVE-2023-46728

highPriorität · verfolgen · 32EPSS 0.060 · 93. PerzentilDEEURUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
5.96% (93rd) EPSS
CVSS 7.5 · high
Is it mine?
134 products
Prüfe deine Angriffsfläche
Who says so?
5 sources
cnnvd · enisa_euvd · fstec_bdu · cert_bund

EPSS · bewertet 2026-10-27

Squid is a caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to a NULL pointer dereference bug Squid is vulnerable to a Denial of Service attack against Squid's Gopher gateway. The gopher protocol is always available and enabled in Squid prior to Squid 6.0.1. Responses triggering this bug are possible to be received from any gopher server, even those without malicious intent. Gopher support has been removed in Squid version 6.0.1. Users are advised to upgrade. Users unable to upgrade should reject all gopher URL requests.

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

  • Behobenlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobenlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0046
  • Behobensquid-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-7:5.5-6.el9_3.5.src as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debuginfo-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debuginfo-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debuginfo-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debuginfo-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debugsource-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debugsource-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debugsource-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-debugsource-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:0071
  • Behobensquid-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-migration-script-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-migration-script-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-migration-script-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-sysvinit-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Behobensquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing this update, the squid service will be restarted automatically.

    https://access.redhat.com/errata/RHSA-2024:1787
  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debuginfo-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-debugsource-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundlibecap-devel-0:1.0.1-2.module+el8.9.0+19703+a1da7223.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.src (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.aarch64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.ppc64le (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.s390x (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:4.15-7.module+el8.9.0+20975+25f17541.5.x86_64 (squid:4) as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.src as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debugsource-7:5.5-6.el9_3.5.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 9)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.src as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-debuginfo-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-migration-script-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.ppc64le as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.s390x as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Server Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

  • Workaroundsquid-sysvinit-7:3.5.20-17.el7_9.10.x86_64 as a component of Red Hat Enterprise Linux Workstation Optional (v. 7)redhat_csaf

    To mitigate this issue, create an access list configuration to reject all gopher URL requests: Set ACL directives in your squid.conf file (or equivalent) as follows: acl gopher proto gopher http_access deny gopher Important: This sequence must be placed above any lines starting with "http_access allow" in your configuration. Observation: Some loss of performance may occur with this configuration.

02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

7.5
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 6.9–7.5

v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hprimary · NVD / NIST USAusnutzbarkeit 3.9 · Auswirkung 3.6
v3.17.5highAV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · FSTEC (BDU) RU
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · ENISA EU
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · security-advisories@github.comAusnutzbarkeit 3.9 · Auswirkung 3.6
v3.16.9mediumCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:Usecondary · CVSS-BT (t0sche)
v3.17.5highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:Hsecondary · Red Hat Product Security US
03

SSVC

Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.

Exploitation: none · Automatable: yes · Technical Impact: partialcoordinatorcisa_ssvcUS
04

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-476USCWE-476USCWE-476US
05

betroffene Produkte (134)

Betroffene Produkte und Versionsbereiche.

20 von 134 angezeigt
06

Advisories (5)

Hersteller- und Ökosystem-Meldungen dazu.

  • RHSA-2024:0046Red Hat Security Advisory: squid:4 security update2024-01-03csaf · redhat_csafUS

    An update for the squid:4 module is now available for Red Hat Enterprise Linux 8. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • RHSA-2024:0071Red Hat Security Advisory: squid security update2024-01-08csaf · redhat_csafUS

    An update for squid is now available for Red Hat Enterprise Linux 9. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • RHSA-2024:1787Red Hat Security Advisory: squid security update2024-04-11csaf · redhat_csafUS

    An update for squid is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • WID-SEC-W-2023-2837Squid: Schwachstelle ermöglicht Denial of ServiceDeutsch2023-11-06csaf · cert_bundDE

    Ein entfernter, anonymer Angreifer kann eine Schwachstelle in Squid ausnutzen, um einen Denial of Service Angriff durchzuführen.

  • WID-SEC-W-2024-1248Xerox FreeFlow Print Server: Mehrere SchwachstellenDeutsch2024-05-28csaf · cert_bundDE

    Ein Angreifer kann mehrere Schwachstellen in Xerox FreeFlow Print Server ausnutzen, um die Vertraulichkeit, Verfügbarkeit und Integrität des Systems zu gefährden

07

auch bekannt als (3)

Weitere Namen und Kennungen dieser Entität.

08

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvdenisa_euvdfstec_bducert_bundredhat_csafNVDCVE.orgMITRE
veröffentlicht 2023-11-06geändert 2026-06-17
09

Referenzen (19)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan