CVE-2022-20918
highPriorität · verfolgen · 30EPSS 0.009 · 61. PerzentilEURUUSEPSS · bewertet 2026-10-27
A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.
Behebungen
Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.
Ein Hersteller-Fix ist verfügbar.
- BehobenCisco FirePOWER Services Software for ASAcisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.0 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.0.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.1.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.2 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.2.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.3 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - BehobenCisco Secure Firewall Management Center (FMC) 7.0.4 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
Cisco has released software updates that address this vulnerability.
https://software.cisco.com - WorkaroundCisco FirePOWER Services Software for ASAcisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.0 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.0.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.1.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.2 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.2.1 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.3 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
- WorkaroundCisco Secure Firewall Management Center (FMC) 7.0.4 when installed on Cisco Secure Firewall Management Center (FMC) Appliancescisco_csaf
A user with Administrator privileges can execute the following commands in expert mode to apply a workaround for this vulnerability: # expert # sudo su - # sed -i 's/^com2sec/#com2sec/' /etc/snmp/snmpd.conf # pmtool restartbyid snmpd If SNMP is not needed on the device, the administrator can remove the SNMP configuration so the device will not be affected by this vulnerability. The administrator can also reduce the attack surface by allowing SNMP connections only from trusted SNMP monitoring hosts. While this workaround and mitigation have been deployed and were proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
cvss
Technischer Schweregrad, 0–10. Eine Zeile je Quelle.
Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · medium–high · 6.9–7.5
schwächen
Die CWE-Schwächeklassen, zu denen dies gehört.
betroffene Produkte (21)
Betroffene Produkte und Versionsbereiche.
- cisco firepower services software for asaalle VersionennvdUScpe:2.3:a:cisco:firepower_services_software_for_asa:*:*:*:*:*:*:*:*
Advisories (1)
Hersteller- und Ökosystem-Meldungen dazu.
- cisco-sa-fmcsfr-snmp-access-6gqgtJ4SCisco FirePOWER Software for ASA FirePOWER Module, Firepower Management Center Software, and NGIPS Software SNMP Default Credential Vulnerability2022-11-09csaf · cisco_csafUS
A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: November 2022 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74838"].
auch bekannt als (4)
Weitere Namen und Kennungen dieser Entität.
quellen
Welche Quellen diesen Datensatz belegen und wann.
Referenzen (6)
Externe Belege — Patches, Meldungen, Analysen.
- https://cxsecurity.com/cveshow/CVE-2022-20918/cnnvd
- https://nvd.nist.gov/vuln/detail/CVE-2022-20918cnnvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmcsfr-snmp-access-6gqgtJ4Scnnvd
- https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmcsfr-snmp-access-6gqgtJ4Scnnvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmcsfr-snmp-access-6gqgtJ4Senisa_euvd
- https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmcsfr-snmp-access-6gqgtJ4Snvd
Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.
Kostenloser Scan