CVE-2020-27153

highPriorität · verfolgen · 36EPSS 0.043 · 91. PerzentilEURUUS
grimoire priorityP2 · Scheduled
Exploitable?
—
no known exploitation
Likely / severe?
4.32% (91st) EPSS
CVSS 7.5 · high
Is it mine?
129 products
Prüfe deine Angriffsfläche
Who says so?
5 sources
cnnvd · enisa_euvd · fstec_bdu · nvd

EPSS · bewertet 2026-10-27

In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A remote attacker could potentially cause a denial of service or code execution, during service discovery, due to a redundant disconnect MGMT event.

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

  • Behobenbluez-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-0:5.52-4.el8.src as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-devel-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-devel-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-devel-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-devel-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-libs-devel-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Behobenbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258

    https://access.redhat.com/errata/RHSA-2021:1598
  • Workaroundbluez-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-0:5.52-4.el8.src as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-cups-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-debugsource-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-hid2hci-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-devel-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-devel-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-devel-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-devel-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-libs-devel-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

  • Workaroundbluez-obexd-debuginfo-0:5.52-4.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)redhat_csaf

    This flaw can be mitigated by only connecting the gatttool client to trusted GATT servers/devices. The flaw is in the service discovery which occurs after a Bluetoth Low Energy (BLE) connection has been established to a device. A secondary mitigation for this flaw is to disable bluetooth. Instructions on disabling bluetooth in Red Hat Enterprise Linux are available at: https://access.redhat.com/solutions/2682931

02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

8.8
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USAusnutzbarkeit 10 · Auswirkung 6.4
v3.18.6highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:Hprimary · NVD / NIST USAusnutzbarkeit 3.9 · Auswirkung 4.7
v3.18.6highAV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:Hsecondary · FSTEC (BDU) RU
v3.18.6highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:Hsecondary · ENISA EU
v3.18.6highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:HsecondaryAusnutzbarkeit 3.9 · Auswirkung 4.7
v3.17.9highCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:Usecondary · CVSS-BT (t0sche)
v3.18.8highCVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:Hsecondary · Red Hat Product Security US
03

SSVC

Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.

Exploitation: none · Automatable: yes · Technical Impact: partialcoordinatorcisa_ssvcUS
04

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-415USprimärCWE-415USCWE-416US
05

betroffene Produkte (129)

Betroffene Produkte und Versionsbereiche.

20 von 129 angezeigt
06

Advisories (1)

Hersteller- und Ökosystem-Meldungen dazu.

  • RHSA-2021:1598Red Hat Security Advisory: bluez security update2021-05-18csaf · redhat_csafUS

    An update for bluez is now available for Red Hat Enterprise Linux 8. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

07

auch bekannt als (4)

Weitere Namen und Kennungen dieser Entität.

08

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvdenisa_euvdfstec_bdunvdredhat_csafNVDCVE.orgMITRE
veröffentlicht 2020-10-15geändert 2026-06-17
10

Referenzen (37)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan