CVE-2019-11043

highPriorität · handeln · 90OT-Risiko · kritischKEV · ausgenutztEPSS 0.997 · 100. PerzentilExploit · funktionalDEEURUUS
grimoire priorityP0 · Act now
Exploitable?
Yes · in the wild
CISA KEV · 31 exploits · funktional
Likely / severe?
99.7% (100th) EPSS
CVSS 7.5 · high
Is it mine?
251 products
Prüfe deine Angriffsfläche
Who says so?
6 sources
cnnvd · enisa_euvd · fstec_bdu · cisa_csaf_ot

hinzugefügt 2022-03-25beheben bis 2022-04-15

erforderliche Maßnahme Apply updates per vendor instructions.

EPSS · bewertet 2026-10-24

PHP FastCGI Process Manager (FPM) Buffer Overflow Vulnerability

In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.

01

Behebungen

Hersteller-Fix, Mitigation oder Workaround, wie von den Quellen veröffentlicht.

Ein Hersteller-Fix ist verfügbar.

  • Behobenfesto_psirt

    FactoryViews (non-Lite): Upgrade to FactoryViews 1.6.0. See the upgrade guide for information on how to upgrade. FactoryViews Lite: Upgrade to FactoryViews 1.7.0. See the upgrade guide for information on how to upgrade.

  • BehobenMES PCfesto_psirt

    Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.

  • Behobenapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • Behobenphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 After installing the updated packages, the httpd daemon must be restarted for the update to take effect.

    https://access.redhat.com/errata/RHSA-2020:0322
  • BehobenMES PCcisa_csaf_ot

    Festo Didactic has released Factory Control Panel as a replacement for XAMPP on its MES PCs. Contact technical support at services.didactic@festo.com to obtain the current version of Factory Control Panel which includes fixes for these vulnerabilities.

  • BehobenFuel-Boss V1 Backflush Systemscisa_csaf_ot

    No fix is planned for Fuel-Boss V1 Backflush Systems.

  • BehobenFuel-Boss V1 Master/Slavecisa_csaf_ot

    Fixes are not yet available for the Fuel-Boss V1 Master/Slave.

  • BehobenFuel-Boss V1 Portalcisa_csaf_ot

    Fixes are available for the Fuel-Boss V1 Standard and Fuel-Boss V1 Portal. Please contact All-Line Equipment Company (866-356-3336) for instructions on how to receive these fixes.

  • BehobenFuel-Boss V1 Standardcisa_csaf_ot

    Fixes are available for the Fuel-Boss V1 Standard and Fuel-Boss V1 Portal. Please contact All-Line Equipment Company (866-356-3336) for instructions on how to receive these fixes.

  • MitigationFuel-Boss V1 Backflush Systemscisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Master/Slavecisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Portalcisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • MitigationFuel-Boss V1 Standardcisa_csaf_ot

    All-Line Equipment Company recommends either taking products that are not fixed off the Internet or restricting the IP addresses that can access them at the router level.

  • Workaroundapcu-panel-0:5.1.12-1.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-debugsource-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-devel-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundlibzip-tools-debuginfo-0:1.5.1-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-bcmath-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-cli-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-common-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dba-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-dbg-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-debugsource-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-devel-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-embedded-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-enchant-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-fpm-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-gmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-intl-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-json-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-ldap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mbstring-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-mysqlnd-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-odbc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-opcache-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pdo-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.noarch (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pear-1:1.10.5-8.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debuginfo-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-debugsource-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-apcu-devel-0:5.1.12-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.src (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debuginfo-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pecl-zip-debugsource-0:1.15.3-1.module+el8+2561+1aca3413.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-pgsql-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-process-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-recode-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-snmp-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-soap-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xml-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.ppc64le (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

  • Workaroundphp-xmlrpc-debuginfo-0:7.2.11-1.1.module+el8.0.0+4664+17bd8d65.x86_64 (php:7.2) as a component of Red Hat Enterprise Linux AppStream E4S (v. 8.0)redhat_csaf

    1) Check your nginx configuration files, specially the ones related to php-fpm for presence of pattern bellow on fastcgi_split_path_info regex and PATH_INFO parameter: ~~~ fastcgi_split_path_info ^(.+?\.php)(/.*)$; fastcgi_param PATH_INFO $fastcgi_path_info; ~~~ 2) If fastcgi_split_path_info regex matches with the one above, for each fastcgi_param PATH_INFO entry perform the following change: ~~~ fastcgi_param PATH_INFO $fastcgi_path_info if_not_empty; ~~~ This step will allow you to safely continue using PATH_INFO parameter while the patch is not applied. 3) Restart your nginx instance: ~~~ systemctl restart nginx ~~~

02

cvss

Technischer Schweregrad, 0–10. Eine Zeile je Quelle.

9.8
010

Basiswert 0–10 · höher = schwerwiegender · Vektor überfahren zum Auflösen⚠ Quellen uneinig · high–critical · 7.5–9.8

v2.07.5highAV:N/AC:L/Au:N/C:P/I:P/A:Pprimary · NVD / NIST USAusnutzbarkeit 10 · Auswirkung 6.4
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hprimary · NVD / NIST USAusnutzbarkeit 3.9 · Auswirkung 5.9
v3.08.1highCVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · Red Hat Product Security US
v3.18.7highAV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · FSTEC (BDU) RU
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · ENISA EU
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · security@php.netAusnutzbarkeit 2.2 · Auswirkung 5.8
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:Hsecondary · Festo PSIRT DE
v3.19.8criticalCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:Hsecondary · CVSS-BT (t0sche)
v3.18.7highCVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:Nsecondary · CISA US
03

SSVC

Eine Handlungsentscheidung — aus Ausnutzung und Auswirkung.

Exploitation: active · Automatable: no · Technical Impact: totalcoordinatorcisa_ssvcUS
04

schwächen

Die CWE-Schwächeklassen, zu denen dies gehört.

CWE-787USprimärCWE-120USCWE-120USCWE-120USCWE-120USCWE-787USCWE-787USCWE-787US
05

Exploits (31)

Öffentlicher Proof-of-Concept- und Exploit-Code.

06

betroffene Produkte (251)

Betroffene Produkte und Versionsbereiche.

20 von 251 angezeigt
07

Advisories (5)

Hersteller- und Ökosystem-Meldungen dazu.

  • FSA-202302Festo: Several vulnerabilities in FactoryViews2023-07-10csaf · festo_psirtDE

    FactoryViews bundles many third-party applications which are used in background processes to provide the software's features. From time to time, vulnerabilities in these bundled applications are discovered. These are typically fixed in newer versions of FactoryViews by updating the bundled applications. FactoryViews versions up to and including 1.5.2 contain around 200 such vulnerabilities listed in this advisory.Version 1.6.0 is a security rollup release which includes updates to all bundled applications and fixes these vulnerabilities. At this time, FactoryViews Lite cannot be updated beyond version 1.1. FactoryViews 1.7 unifies the non-Lite and Lite versions and fixes these vulnerabilities for users of FactoryViews Lite.

  • FSA-202402Several Vulnerabilities in MES PC (Windows 10)2024-02-27csaf · festo_psirtDE

    MES PCs shipped with Windows 10 come pre-installed with XAMPP. XAMPP is a bundle of third-party open-source applications including the Apache HTTP Server, the MariaDB database and more. From time to time, vulnerabilities in these applications are discovered. These are fixed in newer versions of XAMPP by updating the bundled applications. MES PCs shipped with Windows 10 include a copy of XAMPP which contains around 140 such vulnerabilities listed in this advisory. They can be fixed by replacing XAMPP with Festo Didactic's Factory Control Panel application.

  • RHSA-2020:0322Red Hat Security Advisory: php:7.2 security update2020-02-03csaf · redhat_csafUS

    An update for the php:7.2 module is now available for Red Hat Enterprise Linux 8.0 Update Services for SAP Solutions. Red Hat Product Security has rated this update as having a security impact of Critical. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

  • ICSA-26-027-02Festo Didactic SE MES PC2024-02-27icsa · cisa_csaf_otUS

    MES PCs shipped with Windows 10 come pre-installed with XAMPP. XAMPP is a bundle of third-party open-source applications including the Apache HTTP Server, the MariaDB database and more. From time to time, vulnerabilities in these applications are discovered. These are fixed in newer versions of XAMPP by updating the bundled applications. MES PCs shipped with Windows 10 include a copy of XAMPP which contains around 140 such vulnerabilities listed in this advisory. They can be fixed by replacing XAMPP with Festo Didactic's Factory Control Panel application.

  • ICSA-26-239-02All-Line Equipment Company Fuel-Boss2026-08-27icsa · cisa_csaf_otUS

    Successful exploitation of these vulnerabilities could allow attackers to execute arbitrary commands or code remotely on affected systems.

08

auch bekannt als (5)

Weitere Namen und Kennungen dieser Entität.

09

quellen

Welche Quellen diesen Datensatz belegen und wann.

cnnvdenisa_euvdfstec_bducisa_csaf_otfesto_psirtredhat_csafNVDCVE.orgMITRE
veröffentlicht 2019-10-28geändert 2026-06-17
11

Referenzen (56)

Externe Belege — Patches, Meldungen, Analysen.

scry

Angreifer nutzen Schwachstellen wie diese gegen im Internet exponierte Dienste aus. Sehen Sie mit einem kostenlosen Passiv-Scan, was exponiert ist.

Kostenloser Scan